Search:

nothing is right about the three pics i looked at.
is the drip pan under the blower or coil?

i wish we had 28000 lb we salvaged it from a base in yakima alot of after hrs cutting it and cleaning , removing insulation hauling garbage over 500 hrs started in sept 08 done in april 09 still have...

did a salvage job and horded copper since last fall and sold it and now i have this had the last two days off to enjoy it

read the manual

i am down with that .. my employer uses flat rate and it is fair when you take all that is involved gas,oil,tune ups. ect . i get paid from first dispatch to the next, drive time included i have...

have you ever been in a 80 year old house where the return air in the floor joist's
pull your register off the floor and look inside . kids put things inside also .
i have found cars rings and...

it takes additional wiring at least on lennox. out door units, will have a L on the circuit board for light on t stat i never wire it up it is not critical for proper operation

call a pro. if you have no idea where the fan relay is then you do not need to be poking around inside unit. sorry . please call a pro

run your fan, never seen or herd of this but if the place is real small why? did you not go with a mini split system (ductless) i assume your supply's are in ceiling along with your return air?...

#345 is dual fuel heat pump control . function 1 = balance point + 2 * droop, back up is activated if room temp drops by 2 * comp is deactivated
function 2 =comp works only above aux lockout temp,...

looks good from the pic keep up the good work.

You need a discharge air sensor on your indoor coil to prevent the hp from running with gas furnace . also a fossil fuel kit needs to be installed your system is tripping on high head pressure from...

LMFAO i have seen it all now. In the Door .
and the Change ? My wife is now in this stage of life and i feel every thing said above

the 90% will alone save you . your old oil furnace was at best be 60% to 70%
as for the fan cycling the heat exchanger on the old unit took awhile to warm the fan limit , as the new one is...

:eek:thats why i always check for power before i stick my hand in there . even when i pull the disconnect. thats a classic though

My Union States that i must provide hand tools to perform my job. My employer must provide any precision tool needed.
I provide all my own tools as my employer says that any good tech has his own...

when i run into a customer who says its been running good for years. i ask how often is is serviced ? and ask how often they change oil in there car? and tell them this is like a car and needs pm at...

i can not see a customer replacing this part.. who sold this to them??
when a customer buys a circuit board to replace them self's they are told there is no warranty this would also apply to a txv. ...

looks real good:eek: i bet those coils look real clean . poly filters suk i think a installer should ride with a tech and see the mistakes made . i am both a service tech / installer as i work for a...

hybrid i like that. duel fuel /hybrid yea sounds good. for gas and hp but oil ? with hp do they make a high eff oil furnaces ? nice ride

if one fails the rest will also:D:D . i don't like the gas piping . i do like gastite but not into the unit like first pic that will not fly in my area they would pull the meter . inspectors are my...

i wonder if they are getting any return from inside:D

just changed out a 22 yr old lennox a/c and gas furnace the h o had two big dogs and the whole bottom of one side gone nothing but copper . so i would have gone with dogs but if you look at the pic...

it in the attic the home owner will never see it :rolleyes: i hope a real company didn't do this the gas piping is crazy look at the nipple coming out of the gas valve looks like alot of weight on...

RTFM read the f#@king Manual i think some one forgot to read the instructions.