Search:

Type: Posts; User: remtre5

Search: Search took 0.00 seconds.

  1. Replies
    20
    Views
    1,946

    Craig1 is probably correct, but you need a flue...

    Craig1 is probably correct, but you need a flue gas analysis. You needto know how much co is in the exhaust.
  2. Replies
    10
    Views
    945

    This is the Ask Our Pro's forum, and only Pro...

    This is the Ask Our Pro's forum, and only Pro members that have been vetted by the AOPC may post advise here. Please apply to the AOPC today, thank you.

    You can find the rules for posting and...
  3. Sticky: My name is Rob and I have been in the HVAC field...

    My name is Rob and I have been in the HVAC field for 15 yrs now. I started my career as a Chrysler certified tech. I went through an apprenticeship and due to the dealerships owner was soured on the...
  4. Replies
    16
    Views
    1,881

    Sorry I mean pump down. They will not pump down...

    Sorry I mean pump down. They will not pump down anywhere near 0 psi. Sorry
  5. Replies
    16
    Views
    1,881

    One thing to be careful of on newer condensors...

    One thing to be careful of on newer condensors with micro channel coils is pumping them back. Most manufactures do not recomend this at all, you can damage the compressor.
  6. Replies
    18
    Views
    1,676

    The company I work for has been a York dealer for...

    The company I work for has been a York dealer for around 12 years now. They have had some problems. The previosly mentioned and you really have to watch your charge on the newer condensors. the...
  7. Replies
    22
    Views
    2,282

    The intake baffle is not a permanent fix. If you...

    The intake baffle is not a permanent fix. If you properly check the vacuum on this furn. you should be able to see this. The secondary is a common problem with carrier 90% furn. The Teflon coating...
  8. Replies
    6
    Views
    1,413

    Your thermopile should put out 400 to 750 mv....

    Your thermopile should put out 400 to 750 mv. Most fireplace circuits have an on off switch on them. The first thing I would check is the quality of the pilot flame, the pilot could be weak.
  9. Replies
    22
    Views
    2,282

    The first thing is how much vacuum the furnace...

    The first thing is how much vacuum the furnace pulls with the intake and exhaust off. The drain could cause this problem. The secondary could be plugged, but this normally trips the roll out. make...
Results 1 to 9 of 9
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event