Type: Posts; User: moose3702
I do things by hand now because of the computer.
The disconnect is behind the skinny panel to the left of the heating section. I does not look like you will be able to open it past pipes
This guy should be shot. How many laws can you break in one day. Someone is gonna try this and mess themself up.
leaving guages on torches is not recommended. Minor accident they fall you go boom.
.5 megaohms for every 100 volts is a rule of thumb. But thumbs can be bent.
UA local 787
Check the ENTHALPY controller. Make sure it is set correctly it will go into economizer mode if the OAT is under 55 degrees.
Posting of the picture of a tech on a roof with no fall arrest is very stupid and you must know that when using a ladder the 4:1 ratio. Every 4 feet up 1 foot out. Not being a a hole just way to...
yup. There was 200 PSI of nitro in the line sets!
So I blew the charge and did a vacuum. For some reason my micron gauge took for ever to pull a vacuum. Pulled 30" on the gauge, but micron gauge was...
What does this have to do with Trane? They only sold the packaged unit, does not sound like they installed. A bad installation has nothing to do with the Manufacturer. I feel Trane is at the top...