Type: Posts; User: westlaker
Search: Search took 0.01 seconds.
12-15-2009, 02:02 AM
The installers previously had the sensor in the electrical box that feeds the heat pump. I advised the installer I was getting intermittent readings that were off about 5 degrees.
12-08-2009, 12:04 AM
I meant Aux Heat On.
12-07-2009, 03:10 AM
I will have to check with the installer on how he came up with -1.5. Good point it should be closer to -7 as per hydro.
I hear you about the setbacks. I'm still trying to find out whats best.
12-05-2009, 09:14 PM
From BC Hydro,
Thanks for contacting BC Hydro for advice on recommended temperature settings customized to your needs while at the same time considering heat pump controls.
When it comes to...
12-05-2009, 12:44 PM
The installation of the Honeywell IAQ is in and appears to be working. Also the G71MPP is running in Variable mode after the installer flipped the dip switch. Confirmed by seeing the small h.
12-04-2009, 01:11 AM
Don't have a Humidifier, so will ensure CPH value is set correctly. Do you mean these settings for each of the stages 1-3.
1—1 cph used for steam and gravity
3—3 cph used...
12-03-2009, 11:25 PM
I'm hoping my installer will know all the important setup features of the IAQ and my duel fuel setup.
12-03-2009, 10:41 PM
My installer will be coming tomorrow to install an IAQ. Do you forsee any issues
with this stat when running a single stage XP15 heat pump/g71mpp furnace.
Where is the best...
11-19-2009, 01:53 AM
Thanks again Vettgetsmwet04. I wish I knew about the Comfortsense 5000 before the installation. I wonder how much he will charge me to swap out the VP 8320 for the Comfortsense 5000.
11-17-2009, 11:29 PM
Thanks Vettegetsmwet04 for the quick reply.
So the Comfortsense 5000 has a w1 and w2 input for the furnace and another input for the heatpump. From the pictures on the Web, the Comfortsense 5000...
11-15-2009, 10:17 PM
My installer said the G71 furnace and XP15 heatpump is setup correctly with my VisonPro 8320 thermostat.
He mentioned my thermostat doesn't support the variable speed of the G71 furnace. Attached...
10-22-2009, 01:46 AM
My new Lennox XP15/G71MPP is also flashing "H1A622" at various times. I will contact my furnace installer to have this investigated. I also spent about 500 more for the variable speed option in BC....
Results 1 to 12 of 12