Search:

I am trying to stretch another output or two out of my EasyIO 30P.
I want to drive a floating actuator (Honeywell MN6105A1011) using the Oc Output on the 30P. I have never used these outputs and...

I have (1) RTU and (18) FPB's that are controlled by the 3V system. The only interface is the system pilot.
My customer has solar panels and they pay for their power by peak usage, so when the...

Agreed.

Sometimes you will have unhappy customers but you have to explain to them the danger of making such an alteration. As far as your manager goes, he should know better and should not...

We will also be looking for an apprentice in the near future.
We need the Technician first though.

My company is looking for an experienced service technician in Denver, CO.
I must state that I am not the hiring manager but will transfer serious inquiries to the proper manager.
We are a mostly...

What is that pressure relief rated at.... 600psi?

I will be using tcom to communicate with the 30P's which is the essentially using Sedona, this way every point is accessible in the Jace. I will also be eliminating all NDIO/NRIO and moving...

I am trying to decide which Jace to go with and need some help deciding.
I will be controlling 18 AI, 10 AO, 18 BO, and 15 BI through logic on the jace. Besides that I will be importing points from...

How does you programming look using the varying times every day for a schedule? I haven't found a way to input a specific on/off time every day into a schedule, but would like to do this.

I have a building running Tracer Summit, not by choice.
The building manager told me that lately the work station takes a long time to load the graphics and information. I checked out the computer...

You have a point there.

I just wish I knew I was doing this at the start of the job and could have put a sensor in my pricing, its much easier that way.

I was considering that, but I set the schedule for the shortest day so I was thinking it will essentially override using the weather service all together...

I have it inputing to a boolean schedule so that if it does fault or goes stale the schedule will take over.
Id like a photosensor but my customer isnt willing to put any more money in the system...

Thanks Chris, I missed that boolean point, it is exactly what I need.

I am looking to use the sunset and sunrise times to control some outside lights. I can't quite figure out how to use them though to do what I want. Is there a specific schedule that I can input the...

Update:
I have not been able to get it to work. I saw in the Application Director it was continually redirected to another address and would never connect. There would be hundred of "Redirected to...

Have you looked into the "LogHistory" to see if it is telling you that something is going wrong? Or have you watched the Application Director to see if there is something bogging down the station?...

I am running Niagara 3.6.31 with the 3.6.37.4 weather module.

I have been trying to get the weather service to work but have been unsuccessful. This is what the I am getting for an error:

WARNING [20:24:12 17-Dec-12 MST][weather] Redirect to...

I am curious if I can remote access the 30P's through the Sedona Workbench. I have not been able to get this to work. I have forward port 1876 to the public IP and still have not been able to login...

Heres my update...
I seperated my system into half to narrow down the problem. 1/2 communicated the other 1/2 didn't. I kept doing this until I narrowed it down to one suite with 6 VAVs. I inspected...

I do not disagree with you. I believe I have a comm issue too. I have spent a lot of time on the software side and not found any issues there. I am currently in the process of isolating sections of...

Jeremy, thanks for the app guide. That is very helpful. I still need to figure out what my network issue is but atleast Im making progress.



I found it, in a hidden folder. It was in...

Any clue where this file might be located or what it might be called?

I am currently in the process of programming about 100 VAV (M# BAC-7001) using BacStage and then I will be importing them into AX. I go through about 40 VAVs and then my device list stopped...