Search:

Im still not having any luck with this. I tried using the apploader software and I was able to see the points at the gateway with my laptop hooked up, but I still cant see any points back at the...

I figured it had to do something with that software. Thats weird that you mention Desmond because I was talking to him yesterday, too bad I wasn't at the site. Are the clipping files on the...

As far as I know all of the wire and jumpers are correct. I went through all the wiring with tech support and the rep, and everything seems to be wired correctly. Also, the LEDs that light up when...

Its possible that it is communicating to my N2 bus, I might just be mapping the points back wrong. Tech support and the rep have not been able to tell me what I should be seeing at the NAE. Has...

Yes I am using the XPC gateway and the BMS pass through is enabled. When I go to the NAE and do auto discovery for the N2 devices I am able to see the XPC gateway with the address that I gave it. ...

Im trying to communicate to the AERCO BMS II through their communication gateway using N2 protocol. I believe I have the BMS modbus side of the communication running but I still can't get the NAE to...

I connected two patch cables to a switch and it worked. Thanks for all the help

who offers tech support for FX?

I was able to manually set the ip address, but that didnt work. I think im going to try using a crossover cable.

im having trouble connecting to and NAE with a computer that has windows XP home edition 2002. I have an ethernet cable plugged in directly to the NAE. It works fine with my work laptop (windows XP...

Also, is there a way to simulate the program in FX Builder?

hey reaper can you forward that to me also? thanks in advance

I am going to be getting into programming the FX line of controllers. Is it hard to program these controllers? Im going to be using an FX16. I have experience with programming and configuring the...

Is it possible to bring an NCM database into an FX60? Im looking to accomplish what an NIE does. Or would I have to recreate the database in the FX 60?

paulir, Ill take that manual my email is in my profile. Thanks for all the info

why are these 3 conductor? I thought bacnet was only a two wire

Has anyone interfaced with an Aerco product? I have a job know where I am interfacing N2 protocol to Aerco's modbus benchmark boiler. I am able to see it at the NAE but now I am looking for the...

nice, thanks for all the info

I should also mention that I cant access a controller through the passthru feature, I just get a communication error. And Nick, the voltages seem ok I get 2 to 4 VDC on everyone Ive checked so far

Im working in a building with about 25-30 UNT controllers with an NAE 35. The NAE is in the middle of the bus. There was a lighting storm sometime last week that struck a unit but Im not sure if it...

dapper what part of NY are you from?

whats wrong with it?

i have the animation that i want to use i just dont know how to bring it into the NAE as a dynamic image. do i need the plugin for that?

yeah i have the files that i want to use, i just dont know how to bring them into the NAE

TC-9102-0331 controller. They are controllers made specifically for fan coils and PTAC units. I think I figured out both my questions though, I just had to read through the HVAC Pro help file.

how can I add my own animations to a graphic in an NAE?

Im looking into going to the FX class soon. I have heard a lot of good things about these controllers. My question is, are there a lot of jobs that are spec'd specifically with the facility...

ok heres another question. Are you able to override these controllers when they are in unoccupied mode with a push button?

awesome thanks

Is there a way to convert a companion database in to MSEA?

Does anyone have a graphic of a rooftop unit they would like to share? Im looking for one with 2 stage cooling/1 stage heating, and one with 1 stage cooling/1 stage heating.

nevermind i think i figured it out

how do you occ/unocc a TC fan coil controller through an NAE?

which logmein product do you guys use? Do you have to access a computer that is on the same LAN as the supervisory controller then open a browser to see it, or can you access the supervisory...

what about the 20? Is that basically a smaller 60?

nice thanks for all of the help

I am trying to add devices and points to an NCM. I have a system defined but every time I double click it, I get the message "currently accessing data." Then "system cannot access data" and then it...

What do you guys use to calibrate sensors? im talking about digital, not pneumatics. Are there any special tools you use?

Is there anyway to create alarms for pumps in a DX9100 without using a hardwired point? In other words is there a way to create alarms using a module in the GX9100 software?

There are multiple NAEs on a college campus. If I were to add a few controllers, points, and graphics to one of the NAEs would I have to do anything with the ADS/ADX computer? Would I have map the...

yeah you're probably right. its just an old p.o.s. i just wanted to try to learn it and become familiarized with it in case i ran into another one in the future. thanks though ill keep that in mind.

thanks for all the info

isn't there a way to just connect to it to see the database? this ncm was pulled from a job and has an existing database. i would just like to be able to view it

Ive got PMI installed and all ready. I forget what release its at 11 or 12 something. I know its IP address and subnet mask and have an ethernet cable plugged into. whats the next step?

chewlak: how do I connect using PMI?

does jci still make the NCM controller? I think ive seen one that looked just like an NAE. If so, what does it do different?

I am not too familiar with the NCM351. Its probably a dumb question but I was just wondering how to connect to it. I know the IP address, im just not sure what to type into the browser. any...

i c wut u did there

so far ive got this

Option Compare Database

Private Sub Command0_Click()
On Error GoTo Err_Command0_Click

Dim stDocName As String

stDocName = "Preventive Maintenance"

I need a VB code to be able to print reports by the month. So basically I want to be able to select a month a print all the reports that are associated with that month. It might be a long shot, im...

I was thinking about going to the FX school for a week on the field controllers programming and design. I dont think it includes the supervisory controllers, I believe that is another class. I hear...