Search:

Marvin was a true friend.He forgot more than i'll ever could hope to know. Brought me up in this trade always asked how my kids were doing. Loved you Marv. R.I.P Thank you.Will

This may help/ or thought If this unit has a baklite blower terminal block in the blower section. remove/ jump around it. Had same problem years back. With a trane gas pak. If memory serves me...

I did two this past summer 1st was a down draft most expensive 5ton curb ever. 2nd was side draft on a stand made of angle iron.and a huge transition. Had curb mfg come out and measure. made it very...

My 2 cents tells me there is a part/chunk of the valve reed floating in the discharge line in a bend/90 cut into that dude.

Change power head. Usally the problem. Under the insulation you will find it badly rusted. Also readly avalibale at supply counter.

JPSmith right on man. We all live with mistakes. Human.. no question. To live crooked eff them eff them all.

Man you would lose weigth running service in a black anything.. in Texas

Changed filter driers back blew through evap/cap tube. both up and running. usually the nomanclature on comp- are discolored when comp- have suffered hi temps/press. both driers were restricted.

With this model why not run refer lines back up the middle of the case w/the drain line.Just my thinking. Hence when you pull the cond- unit there is a real possibility of a kink.. Too the point i...

bin stat.

I like it for first install. you should be a proud man about it too.

Replacing the door heater on a double dr reachin is this an easy task do doors have to come off.looks to be very involved,any help thanks.

mo stupid

I like finding a pair of glasses and flashlight lol

Heard those expressions for years.Never quite understud terminology.

Is their a thing or where as, of soft ice and hard ice? Only when it comes to evap coils, and what are the tell tell signs.What is HEAVY frost. What is HARD ice. Things that make you go humm. OR...

I did one several years ago( after setting of new head) Had to remove comp. dump water and oil removed tev drier etc.. repiped warrenty cond-to evap and vacummed for a day or so nitro,vacum...

Thankx gents I got the go ahead to make the repairs leak found at tev equal. line.

Need some help. Larkin m#mt310 evap. new cond- unit Cope m#FJAMB500TFC020. First is this properly sized. We are in North texas (DFW) looks like new tev??? can't see valve covered in heavy...

Yeah man got to get her to behave.

the problem was the liq. sol. picked-up part today and installed.Unit shuts down on low press cntrl. after sol. deenergizes. used pinch-off tool to be sure.thanks for your response.

Just need help in my thinking/diagnostic.This is a 600#er remote 404a after harvest lets say bin full (door open) Unit will not pump down,low press c.o.6psi c.i. 26psi after several attempts...

You have a water flow issue are coils heavly frosted..... no defrost problem. clean drain lines make sure they are pitched correctly and free flowing

..... crud in the drain partial blockage lots of traffic ?..boxed (card board) goods fork lifts in and out from a dusty area. clear away ice in pans and add warm water should exit just as warm... to...

yes and yes sliding glass in the back coils top and bottom...... 2nd multi-deck 12 ft coil in back mirrors top