Search:

noskilltech, do you have the CAF file for this? If so could I get a copy? I am looking at doing the same on a couple of units.

Thanks,

I saw this on youtube and was wondering what is up with this Yellow Jacket digital manifold as it is duplicate of the Digicool it seems.I know they have a new version out but was wondering about this...

In simple laymans terms this was a huge problem that cost York tons of money that most field guys never even grasped. At some point you have to quit giving the customer everything when it is not...

Please enlighten us as to all(as that is tied to the OP question in the way this thread has turned) of the changes for field guys that was so disastrous compared to York...

OK,What was changed from day to day operations for York personnel are the York chiller line or any York product? The only thing that was eliminated was the York control line that I know of.

Still...

What actually did they change about the chiller product line?The York business plan across the board was in shambles,hence the reason the York brand was able to be purchased(not took over).

Comments below...

That Blue Koolaid is pretty darn good when I will be retired and sitting on a lake fishing.

Pretty much sums it up,and if York was doing so great why was it up for sale?Why didn't York buy JCI and set JCI straight on how to run a business?:whistle:

Some of you guys who post on here are a...

Can't get the forum to upload the format.

Here is the attribute info you asked for on a PID loop:
Z (n*) Working Setpoint (WSP)

A (1) Process Variable (PV)
A (2) Output...

X=Analog inputs
Y=Outputs
D=Digital inputs
XT will get you into the Extension modules
Z=Pid modules
A=Attributes
If I can find an old "cheat sheet" I will post it up

You just have to update to major revisions one at a time to be safe is all(2 to 3 to 4 to 5)No need to send off to India...

If they don't have a copy of Rev 2 loaded they are not wanting to the...

Well at least you anchored them down so they don't get blowed away by the wind...

NCE will do it through the WEB but for that cost you can replace the device itself.
...

I haven't done much residential work in years,wish I would have had a camera back them to document some of the things I saw.

Now as far as some of the things you guys have posted pics of on(like...

Go back and ask him how he knows if the seals are still good in his vacuum pump,then look at him when he gives you that weird look and say "they do go bad,you know"

Thanks guys:)

ascj,

One more question if you can help, 3 phase or single phase?

Saleman brought only a model # back from the job site.

Thank you!

Looking for specs on a GCS16-953-200-6Y

Tonnage and btu input.

ISN is supported through SIS

ISN]

You need a network with actual field devices.

You are to funny,seriously. The reason the freeze on PC's is because they will be replaced with a new HP laptops that work inplace of the NEXGYN handhelds device and support MSEA for techs.Why would...

Pull the power until all lights are extinguished. Re power and wait until Run light is on steady and no activity on the PEER light.

Wow Freddy-B getting a little slow with your info uhnn? Been on the horizon for almost a year for the field guys and has been put into place in several branches already.Might need to buy a few more...

Is it physically mounted to the unit? Did you not "tear into it" just to see what it was, I know I would have.Guess I am just nosey...

Anyway it doesn't look to be over the condenser anyway.Looks...

That is pretty much any JCI thread and Freedy_B...:D

$2399.99 here.
:D

Freddy B,Please link me to where you are selling all of these terrible devices you hate so much.I know several who will be willing to buy these "pieces of junk" that you are constantly ripping...

Yes,only option not released yet I believe is the heatpump contoller. See page 8
...

Even though some on here only visit here to flame JCI,here is something else from JCI instead of the Tec zone control that no one has yet mentioned and it takes all of 30 minutes to setup once...

You will have to send it in to JCI and have the password reset to download or make any changes if you do not have a working password.

Resetting an alarm or the N30 itself? If the N30 why do you think you need to reset it,is it locked up/no live data?

To clear alarms is the F1 button after logging in.
To reset N30,cycle power.

Install a pilot positioner on one valve to set the stroke offset if both work at the spring range currently.If they are both "odd" spring ranges but a positioner on both.

4.1 is already out,
The Java problem came about at 4.0 with the difference in SCT and CCT and stepping back to prior releases.The ANY_JAVA patch was to fix that.

You need the correct JAVA for the version of CCT you are running.Might not be the same as the NAE is needing to run.

Slave a relay off of the signal to the gas valve and either power or monitor the contacts.:confused:

Download the one you got off of the network and see if it performs the same...............:DJUST KIDDING!


Open up the DX20.dxs that you got off the network and compare it point by point to the...

If you can show an invoice where you actually paid for your original copy of software you can get another one at small cost.

Berg, is it just the TEC's or are other devices also bouncing?

Sort of along the same lines with Trane and their Eagle software... :rolleyes:

The older York heat pumps did have a balance point to lock out the heat pump below balance point,which there was documentation depending on the part of the country as to where to set it(been a long...

What is the difference with working in a right to work state for a company who has some unionized techs yet you are not union?