Search:

Hi Hilmar,

www.fieldserver.com/products/QuickServer/QuickServer.php has a tried and tested gateway for this application that is LonMark & BTL approved.

Regards,

Richard

Hi,

The QuickServer does allow oject names to be assigned and difffernt network numbers to be assigned.

Thanks,

Richard

Correct the QuickServer is a gateway and we map points between different protocols, it supports the following BACnet MS/TP speeds, 9600, 19200, 38400, and 768000

Thanks,

Richard

The QuickServer is a BTL gateway and supports a host of baud rates. The QuickServer is successfully deployed internationally with most of the BAS/HVAC players.

Thanks
Richard

Hi Dracula,

The AMX intergration with the FieldServer can provide the following solutions, BACnet/IP BACnet MS/TP, Modbus RTU, LonWorks & .... any of the 100 protocol options from FieldServer.
...

Hi Dracula,

FieldServer works closely with AMX and AMX has tested the integration sucesfully, the FieldServer interface will connect AMX to BACnet/IP, LonWorks, BACnet MS/TP .....

Regards,
...

Hi Gerald,

If you still have an issue please contact me directly and I will get it resolved immediately.

Regards,

Richard
(408) 964 4447

Hi Steven,

FieldServer has a number of hardware solutions which have different point count limits, the cheapest being the lower point count. The FieldServer Metasys N2 to BACnet/IP has been tried...