Search:

i requested that, people were spamming it here, I didnt approve, seemed like the best solution.

definitely some tribalism going on, it doesnt come from me, Ive been hands off for a while now, I missed the first week of the action because I didnt even log in to my own site lol, thanks for the...

so when that site goes down everyone can flood in here and mention it by name?

go ahead and try it now, see what happens, same policy here

give it a shot

BTW they fed all of this crap into Windows 7 and 8 with an update

Almost every site on the internet is tracking you and selling the info to advertisers, including this one

Microsoft just stepped it up to the system level with Windows 10

turn it all off in the...

aww man, I thought this was really Doug Baldwin

Nah man, this is the real OG Doug Baldwin right here

Everybody in the biz knows freakin Doug Baldwin

Are you sure this is Goodman? they dont have models that start with X, in 09 it would be a GSH for a 13 seer heat pump, GSZ if it was 410a

Here is the service bulletin I mentioned
...

That is not a valid model number, Goodman has a service bulletin on this issue for units with a Copeland recip compressor in that time frame (09) the noise resonates into the indoor coil

I didnt even see one homeowner thread there

I worked on the oceanfront for years, those units are in great shape

I quit drinking, Im on too many drugs

He is AKA PaysonHVAC

Chinese Kwality

Try this

http://itunes.apple.com/us/app/user-agent-browser-simply/id414229165?mt=8

They never intended for anyone to replace parts in these things lol

Some are still around because of those Carlyle recips, I think they might run forever

Click your name at the top

VB4, the Windows Vista of forum software lol

should have waited for VB5, it wont be long now

There is a service bulletin out on this, speed tap #4 on a certain date range of equipment has an issue with low resistance, causing a low voltage short

There is definitely a reliability issue...

The variable speed blower settings are likely set wrong

The 2 lines are identical

Every manufacturer is using POS Chinese reversing valves, only way to avoid them is stop selling heat pumps

Yeah, not the same wiki, Wikipedia is a free online encyclopedia and has nothing to do with Wiki Leaks

Everyone needs to get involved in this if you want to keep the internet free and open, set...

When I was young (and poor) I installed a used system in the house I was renting, there was insufficient electrical service for auxiliary heat, as expected the defrost cycles caused a problem, I...

You can have it converted to the updated defrost control also, part # is PCBDM133S

It does require some minor wiring changes though

There are generic electronic defrost controls that can be retrofitted to pretty much any heat pump, The old Amana would be one of the most challenging though, you'll need someone who really knows...

That is called the spider design, its right out of ACCA manual D, not saying its ideal, but its not something a hack pulled out of his rear either.

Not if you disconnect it first

If the 3 pipes are facing up I cut out with a sawzall right at the valve body, then sweat the stubs off 1 at a time, If they face down I use 2 torches and a helper to sweat the valve out, then braze...

You say you have an air handler yet you are quoting instructions for a cased coil

On the 4TEE model you flip the coil, unless you want condensate going everywhere, the coil apex will face the...

An XE 1000 has demand defrost, with a coil thermistor the slips into a tube at the bottom of the coil, it has yellow wires, and its on the control panel side of the coil

The part in the picture is...

Its an over/under package heat pump, 12 SEER

http://www.trane.com/webcache/un/packaged%20heat%20pumps%20%28pkgp%29/product/12-1253-05_03012009.pdf

Let an exterminator handle that

I hate bees

new hoses? sounds like you didnt have the schrader pushed in very far, the thick seal on a brand new hose can sometimes cause that problem, sure sign is the suction takes a long time to drop back...

Unit could have 10 year compressor warranty, will only cover parts though

A good company will verify that for you with Rheem

In any case, Shop for a reputable contractor over brand

ICP was bad for it too, first time I encountered the stuff I had that smell on my hands for a week, nothing would take it off

Chinese Kwality

That would be best, If not I'd give them a thorough flush with RX-11 or something similar

Ive tried cleaning them up with little success, if the compressor needs to be replaced I wouldnt even consider installing a new one, sell them a new system

It's not just me, they lost thousands of customers with the crap they pulled, I'm sure you will do fine with it though

with their new pricing structure, I'm sure a buggy vb5 will be rushed to...

Good luck with that :LOL:

vb4 is garbage, and so is the company that owns it now

Just run a dehumidifier, you dont need supply air from the AC, if you do that without a return also, you will create a negative pressure in the house and increase your infiltration rate

I think they will still flow backwards, just all of the crap it caught in cooling mode will kick back out the other way

Some carriers will throttle your speed when you hit 5GB data usage in a billing cycle, when they do its slower than just plain 'ol G

Go into the Style Manager, All Style Options

You can change the message area width under "sizes and dimensions"

(I did look that up)

No, Ive dealt with this issue before

How did it work? I cant tell since I have the ads and sidebar hidden lol

Change the display order of the smilies, set the larger ones to a higher number, they wont display until someone clicks [more]

http://www.istockphoto.com/file_thumbview_approve/8953120/2/istockphoto_8953120-cuckoo-clock.jpg