I wish you luck, even if you can get the software reverse engineering a DX-9100 program is no easy task for an experienced tech with years of Johnson knowledge.
Type: Posts; User: klrogers
I wish you luck, even if you can get the software reverse engineering a DX-9100 program is no easy task for an experienced tech with years of Johnson knowledge.
Load cell(s) under the mounting feet? Otherwise some sort of thermographics mapping system probably need to talk to guys that work in manufacturing control systems.
Ok, I was wrong, it is not as simple as I remembered but it can be done. Add a "Action binding to your "Lightbulb" with the active slot of the ORD for a new Boolean writable, use mouse event and set...
Use the mouseover to toggle the visible property of the ploy shape.
Distech site has changed a lot since I posted that link 2+ years ago.
There are several ways of doing this, a member on here MaxBurn has written a lot about it and he has some good ideas. However the quickest and easiest way for those that do not fully understand IP...
Watched all your content so far, excellent job.
Is this the type of sensor that has to be "unbound/bound"? if so Trane will probably be the only option.
I 100% agree with you on that.
Are they on a different domain?
I always used the Vykon Pro Global points to achieve the same result.
Kevin
Since we know nothing about your background and it would appear that you have limited knowledge of controls in general it will probably better for you to engage the services of a company with the...
+1
I used outboundSMTP from Duocircle for years, small fee but much more reliable then gmail and other mail providers I tried.
SMS never found good solution, cell providers email to text sometimes...
11 year old thread, luckily I have not destroy all my old files yet. This is the document that I sent out back then, it does not directly answer your need but may assist you to figure out the answers...
I would take him up on this offer, a much faster and cleaner result.
Check your PM's
I can't say this with 100% certainly but its highly unlikely that CPT tools will work over MSTP.
Try creating a new Windows admin user
Info on setting up BACnet on UC400 and other devices. Pay particular attention to the "BAS Control Selection" tab instructions.
...
Look at Sensaphone.com thy will have something that work for your application.
Try going to the correct Niagara folder then /Bin/wb.exe, that should try to restart with console window.
Have you tried starting service with a console window? If so what if anything does that show?
DC = Data Center
You are not telling us the type of sensor (1000 ohm, 10K, etc) and what it's wired to, but my guess would be the the controller input is set to only scale the signal between that range.
hvac69 has a point, unit will not start if space or supply air sensor is not reading correctly.
What is AV2007 reading during the changes?
I don't think that is the case, I have seen units with the RTU-OPen (Bacnet) card installed running from a conv. thermostat.
Write to AV1902, read from AV2007, have tuning policy set to Min write 1 min and max write to 2 mins.
Not sure if this helps any,
Kevin
A brand new member wanting access to the secret decoder ring - I think not
@leamthis I suggest you talk to your vendor for assistance.
As Orion242 said the Gateway should not matter too much on a direct connection, but if you have the Jace or Laptop Gateway the same as the IP it MAY cause some issues.
What is the gateway address set to in both the Jace and your laptop? 101.10.100.1 for the Jace LAN port is a little unusual because gateway device is often set to xxx.xxx.xxx.001.
There is a flaw in 4.8 that causes the Jetty web server to quit working, there is a program object available that checks for this and restarts the JWS. Or upgrade to 4.9.
Kevin
Most USB to RS232 convertors with the FTDI chipset will work without any problem, avoid the ones with the Prolific chipset they don't work well with some setups.
plus 1
Sounds like you need a BQL on the device slots not sure if that is even possible, greater minds than mine would need to help you with that.
Not sure, all my LON experience was on LNS stuff
Had second thought's on this, an UHC-302P controller might be pre LNS so Network integrator wouldn't work, believe Circon's original LON software was called "System Integrator or something like that....
As far as I remember you need the original source files. Network Integrator was a licensed product but they may have removed that requirement for some of the old versions. Not much help to you but I...
Might want to try using a Bacnet router and bringing it into the Jace using the secondary Ethernet port, the MSTP port is definably the weak leak in the chain.
Would recommend that you either re-post this or get a moderator to move it to the controls forum https://hvac-talk.com/vbb/forumdisplay.php?26-Controls
https://www.distech-controls.com/en/landing-pages/softwarecenter WARNING does not work on Windows 7
I believe that the dongle end may be https://www.alliedelec.com/product/phoenix-contact/1840379/70054706/ The board end might be a Carrier special only but not sure.
Does this help.
819740
Serial shell
There has been many threads on here about York RTU's and Bacnet over the years, the quick summary of them would be remove the Bacnet translator and connect using modbus, or control unit using a third...
No verification on signup email
Signed axcommunity module for 4.9 available here:
https://niagaramodules.com/exchange/niagaramods/ax-community-module
Various sites have some information on signing modules, try this for a starting poit:
https://know.innon.com/how-to-self-sign-a-module-for-niagara-4.9