Search:

Hello,

Flash memory is the same as a standard PC idea. For an NAE35 or NAE45 it has allocated 12Mb (uncompressed) of flash memory from the NAEs 128Mb of flash nonvolatile memory. For the NAE55 or...

Hello,

The CCT performs a count of obects and shows this as the % at the bottom. So for example, if you have an application with 2500 objects, this gets divided by the default number of 3000 and...

Hello,

If the suggestion from Chinna doesn't work you can do the following

From the "Expert Mode", you will have the Device Diagnostic Object. This will create a report that breaks out CPU use...

Good idea. You would need to setup a schedule and do a pull every time you need data. The MEU comes with the ADS so no extra purchase is requried.

Hello,

JCI had DDE one time to do this. I don't know if it was only on the M stuff. The other way of doing this is with 3rd party software \ device. You could BACnet\IP from MSEA into OPC for the...

Try this - it worked for me

If you have SCT installed, you will need to remove this.

Remove all your java from the add/remove programs, and delete any folder on the C drive.

Remove the...

Hello,

I've attached one that I found which (I think) you are wandering about. Let me know if this's correct390561

If so, this is a known issue because the Master is on a different NAE then the...

What are the versions of the NAE \ NCE? You have added in a new NCE and the point within this NCE is not being updated by the Master which is on the original NAE. Correct

You have some else...

Hello,

Known issue with communication - recall!!

You need to check the version of the S-Lincs board. If the S-Lincs date code is 10208 and earlier, it needs to be updated. If the S-Lincs has...

Hello,

Don't fully understand your question - but is this what you want;

NAE-1 has a field controller with a outside air temp.

NAE-2 has a field controller BUT no outside air temp.
...

See comments

What's the issue? How do you know their is a problem?

If you or whoever installed the SQL as per Document their shouldn't be a problem. Is the SQL on a standard PC - what's the OS.

Hello,

Viconics reqiure 24VAC, so this won't work. Yes battery powered.

Thanks

Hello,

I had posted a request on wireless stats and had great feedback. However my requirement is for a Temperature and Humidity stat that also has a LCD.

All the stats I can find either...

Sorry - nope

The audit trail is in the SQL. It will only tell you that something has been removed.

What are the issues? How do you know their is a problem?

Is the system a standard ADS\ADX or a split ADX?

What SQL are you using?

Do you have the metasys database manager installed?

You can also look at

SQL (MSDE and SQL 2000) error log:
C:\Program Files\Microsoft SQL Server\MSSQL\LOG

SQL 2005 (Server and Express)...

you need SCT

There is a known problem with trends not being sent to the ADX at verson 5.2. What is the exact version you have 5.2.xxxx

Verson 5.2.7 and higher should fix this.

Let me know

Can you take a screen shot of the error

I gave up the second table as it did the same thing.

Anyways the NCE - 32 devices, 2500 Total device objects, 1 N2/MSTP bus, and 1000 Device Objects
The NAE35 - 50 devcies, 250 total device...

Tha above table didn't tab correctly - so here it's again


NxE Model Devices Total Device Objects N2/MSTP Trunks Supported Total Trunk Points
25 32 ...

- On a NAE, you can choose what communication you want - N2 or MSTP. For a NCE, you need to order the correct version.

- The NAE is about 2K more then a NCE.

- The NAE supports more N2 \ MSTP...

What version of Metasys are you running?

Hello,

In one of my posts, this stat was reference for our requirements
http://www.can2go.com/documents/c2g-sensors_DS_STW-THW%20Sensors_91803502A.pdf

I'm looking for feedback if this is a...