Search:

She must be a Blonde

Suzy,

Air conditioning systems are sealed systems, if freon is needed, then you have a leak. The leak needs to be repaired or if it can't be repaired then equipment replaced. As far as your...

After cooling compressor, recheck windings, if you get a reading on all terminals, the compressor was out on overload. If this is true then you need to start compressor and check freon charge, a low...

Goodman offers a exceptional warranty on Air Handler and Condenser when purchased and installed together. 10 yrs on parts and lifetime on compressor for the 13 seer only.

Another way to size condenser is look at evap. coil and determine its size, label sometimes on outside but usually on inside. Copper tubing size indicates 1-1/2 to 2 ton, if length is less that 35-40...

As the freon flows to the evap coil, it is a high press liquid, the press. is dropped by a metering device,(TEV, cap tubes etc..) as the Pressure drops so does the temp., the freon absorbs heat and...

First the Mfrs. have recommended that on Electric A/H, the coil needs to be on the bottom, if coil is on top and leaks, water and electricity(heat elements) do not go well together. Another note a...

Also R22 is not on its way out, a newer 22 freon will emerge but it is compatible in existing
R22 systems. Freon 410a has its problems, the higher operating pressures has caused premature failure...

all of the brands you have listed are good brands. One of
the important issues is your spending limit, what extra, if any add ons you want. Then the space available.
Just a few bits of info you...