Type: Posts; User: AirTechMech
Testo 605 H2 is my choice. I have both the testo 605 H2 and the fluke 971.
sw_lv2005, what is your email address. The email address in your profile is not valid.
That is why it is commonly known in the trade as a packing gland. I can't believe this wasn't known!
Looks like a polycold auto-cascade and not a blast chiller.
Not really, its just anything self contained is a PITA.
N2fords advice is 100% spot on. Check your heater calibration on your H-10. I have the H10-PM, the D-tek select, the TiF-ZX and FP SLR2, my preference is the D-Tek Select, but the H10 is my second...
It sounds like something is wrong with your leak detector. Time to invest into a new one!
I also have to disagree with you on this. I too have found leaks not worth fixing leak testing this very same way.
No, that very small delay was caused by the leak reference being set to such a small leak .1 oz/ year, the fan blowing the sample and that you have to keep the wand moving with IR for the...
In using many different leak detectors my go to preference is the infrared Dtek Select. I have used the H10PM, Tif ZX, FP SLR2, among others and I always come back to the dtek select as my primary...
It is designed in the Melbourne, Florida USA by Bill Williams the president of Twin Rivers Engineering but manufactured in the PRC.
Oh, the Inficon is designed and manufactured in the USA.
My comments were not indicating the SLR2 is good or bad, just meant as matter of fact.
But if you are interested in my opinion the SLR2 is really a good performer comparable to the Inficon Dtek...
It's not Fieldpiece technology or design. This device is designed and made by http://twinriversengineering.com and also private labeled for Robinair.
Proudly made in the PRC.
You mean a Digi-Cool 1200 badged as yj.
I have the 1200 since around 2006-2007 and the 1250 from what ever year that came out, in and around 2009 and I also have the AK900 since it cam out November of 2011.
Let there be no fear in your...
What is this worth?
Therein lies the problem!!!!
You can lead a horse, but!!!!
Use both of them on any and as many refrigerants as you want.
My BluVac is still chugging along just fine since early 2011. I'm a happy camper!
What carrier has their own HVAC Tech's? I do quite a bit of work for the #1 carrier.
If you like the H10 then as a back up I'd recommend the Tif ZX.
On the repair I would recommend emailing or calling Bacharach to see what their charge for repair would be.
I'll have to agree with the Testo 510
And this is why I support DC, supporting a fellow tech is a great thing but what's better than supporting a fellow tech is, supporting a fellow tech who has invested beyond comprehension into this...
Just read!!!! You decide!!!