Type: Posts; User: lynden
Maybe I should go back on the one I had and look for a hamster!
I had a piece of aluminum foil land on top of the primary limit after falling off the underside of the evaporator coil, causing a short to the heat exchanger. I still have no idea where the foil came...
We make everything ourselves, or I should say, they make everything ( our tinners). The only thing I've perfected when it comes to sheet metal, is bleeding.
Won't the jumper from aux to G bring the heat on with a cooling call also??
Could the manifold be cocked, or twisted, not allowing the orifices to point straight into the burners? Just a thought, let us know what you find!
Nutro, natural choice. Our lab has ate it since she was a pup, will be 14 in July. It's about 40 bucks for 30# here. She goes though 1 bag every weeks.
Yeah, they don't give up as long as they get alittle attention every now and then.
George, was the other name chippawah? We installed truck loads of the aprilaire 224, that's all our company put in, along with all those orange door Chryslers!! That was a few years ago though,...
Ahhh.....well...... Yeah? No, I didn't pay attention to dates, sorry. Still, nice job!
It's probably too late for us, after all the bad habits we've picked up over the years
Very clean, sure makes trouble shooting easier down the road. Nice work, I like the labels as well.
With his electrical back ground, of course they're safe.
I hope for his sake when he has that humbling experience it is not at the expense of someone's well being.
I have never seen it done before, but have found quite a few evap. Coils sitting on top of counterflows over the years. Destroys a heat exchanger pretty quickly.
Very nice work!! As a service tech, I appreciate seeing all the manuals left where they will do the next guy some good. We started installing a metal file box for all paperwork on the drop of our...
Looks like your doc does good work, sucks that its your driving finger!
I fell and torn it originally, but think I finished it off picking up our 16 month old son.
I would check for s spider nest in the manifold. It sounds like that burner is starving for some reason.
Depending on your model #, most Lennox units have the capability of selecting what type of thermostat Is being used (single, or multi-stage) in your dip switch settings. If single stage...
I wish you a speedy recovery! I too am in the same boat, had rotator cuff surgery Friday. I have been assigned the couch for the next 8 weeks!
I'm not sure if there is a difference between infinity and evolution( Bryant's version), but they did have a problem with the UI loosing its memory. I believe it was on the version 16 and older. If...
I have seen this happen with w/r thermostats when the batteries go dead. I also had a humidistat bringing on the heat due to being miswired. Maybe something to check, good luck!
Is this unit on LP? I think carrier had an add-on lock out timer, and gas pressure switch that tied into in incoming pressure tap of gas valve. I have changed many lock out timers for this problem...
Thanks for the replies!
I'm not sure, but I think this is a Chrysler air temp. I think it is a model 1260?