Search:

It was low on charge add some R22 but both pressure stays the same it has restriction . It is too old for door switch

I am coming back after 1 year I was sick w/pnemona . I am feeling better and working on traulsen refrigerator which temp reach 38- 60*. s/p is 15# h/p is 175# w R22 . I charge the system it goes...

You are right I jump to conclusion w/out considering all the facts but his situation was so close to mine I could't resist
Thanks
no wannabe

I came this far after 32 or 33 threads I accumulated enough info to understand operation of Walking freezer .And this acquired knowledge help me to troubleshoot in systematic fashion which help to...

fan terminator is defective

I was in the exactly situation replacing DTFD solve the problem

I almost gave up but next day i went back turned off the evap fan i see frost building up which gives me idea that that evap was not flashing gas because of fan running so i try looking for DTFD it...

You are right . ,this unit was not working at they were using 3 door reach-in. When i started they do not want the same guy working who change out the compressor a year ago. like i said box went...

That's what iam trying to achieve

You are right . ,this unit was not working they were using 3 door reach-in. When i start they do not want the same guy working who change out the compressor a year ago. like i said box went down...

I am sending u attachment for sealing a small system

i Would reverse flush w/ 4.oz of r22 and then 125 # dry nitrogen it will clean the cap tube unles poe oil has not form salt like material inside cap tube. S.P 1# amp 1-1.5 for normal operation

check txv screen it's clean turn off avap.fan to see flow of refrigerant , frost was building all across evap coil follow sporlan instructions to adjust SH left unit running all night chk next...

Thanx for your advice

OH noooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooooo

Thanks all of you guys for advice iam going there today I wil remember 3. things for sure They must be fit for it. They must not do too much of it. And they must have a sense of success in it

i am working on walking freezer
which was not running
faulty starting component
ran unit it trip on low pressure switch.
frost on txv and distributor tubing
h.p 350 l.p 25# amb. temp 95*-100...

I am sending attachment

I am making effort to become a pro an my family equipment

Yes it is ice machine

ambient is 95* I have no problem w/cycling now
H.P 275-300# S.P 25-30#

Did it start up at all?
Initially it was short cycling potential relay was faulty,afer replacing start component now it start and running

yes I can pump w/solenoid

txv bulb is tied to where...

Manitowoc 0605WQY Ice machine dumping water all the time replace dump valve same thing need help

I am working on walk in freezer R404A condesing unit ,it was short cycling for 5-10 seconds. The...

I changed pot. relay and s/c before i turned on i checked l.p 140# and hp 220# decreased lp to 60# ran unit it ran for45 sec and then s/c pop out. changed s/c this time it ran longer than before i...

I am working on walk in freezer R404A Air condesing unit ,it was short cycling for 5-10 seconds. The H.p was once 300psi, L.P was 0. upon playing W/ the dual pressure switch ,system would kick in,...