Type: Posts; User: SurreyStevo
Search: Search took 0.00 seconds.
05-02-2013, 11:11 PM
This is the Ask Our Pro's forum. In order to post a response here, you must have verified qualifications and have been approved by the AOP Committee. You may ask a question by starting a new thread....
03-01-2013, 01:41 AM
I talked to the wholesaler I deal with, it's a cheap part, so I'll throw one in. Thanks for the tips.
02-28-2013, 12:32 AM
Sorry. I miscategorised my post. I was aiming for Tech to Tech - Residential.
02-28-2013, 12:04 AM
I have recently installed a 2 ton York LX series YHJF heat pump at my house. I have it set up so the compressor is locked out anytime it's below 45deg F and then the furnace takes over. York says...
That makes sense Mark Beiser. Colder liquid refrigerant would give a colder evap coil (heat pump) and possibly increase your outdoor ambient TD.
Last summer, I had installed a Keeprite heat pump at my parents house. About 20' of the lineset is exposed to the outdoors. I have never seen it out in the field, but shouldn't both lines should be...
01-24-2013, 01:29 AM
The circuit was on a 15 amp breaker, which isn't ideal for this unit. It only had a port on the suction side. Another thing I'd forgot to mention, the compressor's external overload started to trip...
01-22-2013, 08:48 PM
I think I figured it out. After burning my arm on the liquid line, yeah the liquid line, I figured that there could be non-condensables in the condenser. I pulled the charge, brazed in an access on...
01-22-2013, 01:49 AM
Had a service call today, a 2 Door Display Cooler had been tripping the breaker. I took an amp reading and found it to be drawing 12.5 amps, the name plate rating is 11.1 amps. The unit...
No * and brand bashing.
Once my socks get holes, I use them as rags. I actually have a bag of them. The guy probably MacGyvered it.
I'd recommend Haakon Units. They're built in the U.S. & Canada. All the guys that I've talked to say these air handlers have the best quality.
Results 1 to 12 of 12