Search:

numbawunfela is right. These are trend files that have not been wrote into the SQL database. I’d try rebooting the PC as a first attempt might just be a service that crashed and needs to be...

This was an ALC Cloud install. Manuals were lacking but tech support was great. I’m not a Niagara guy so not sure there.

Traffic at the site is still normal BACnet/IP so system keeps running normal. It’s just the traffic to the Webserver that would be effected. I have a locally installed webserver on-site as backup...

Just did my first BACnet SC this week. The hub was in the cloud AWS, so the sites local panels did not need any port forwarding because the connection is outgoing. The SC hub had a sub domain URL...

Yes, I've used the USB22 to connect to ARC156. You will need to contact CControls tech support as the files on the website didn't work. I talked with "Diego" and he was able to get me a link to the...

You should have access to the help docs. Take a look at the installed client steps. There are quite a few steps to this including creating or importing certificates. You can also find the DCC 4.1...

Are both the sever and the client part of a domain or just workgroup PCs. Reason for asking is the time on the server and client have to be the same. With in 30 seconds of each other or the client...

Used this for same setup. It also had fin tube. Part numbers in drawing.

Lin, have you been able to capture ARC156 with a data logger? I was playing around looking at it with a scope and also found a few third party devices that talk ARCNET....

I’ve searched the web for a few devices to read the ARC156 and came up with the following;

1) ArcShark https://www.ccontrols.com/sd/arcshark.htm . This has two issues in my thinking. It actively...

827430

http://www.cypressenvirosystems.com/wp-content/uploads/ARC156-Wiring.pdf

Ok I'll bite,

How are you capturing ARC156 with a regular usb to RS-485 converter? I've just started to play with some ARC156 on a site with communication issues. Found a bad DIAG485. Was able to...

You need a BCM-ETH or BCM-MS/TP to be able to tie into the system. The BCM-TUX only has a comm port to talk to the TUX devices. All the BCM modules have ribbon cables that interconnect them. Or maybe...

Well the BCM-TUX module talks to the TUX devices and then exposes the objects as BACnet. You do need to program the BCM-TUX so it know what TUX devices to talk to. The BCM-ETH then makes it viewable...

Just wanted to send a follow up. I had a BCM-TUX connected to a 450ST-TUX controller and was able to see the points with YABE and turn the DO’s on/off.

But, in the end we were able to convince the...

Did you look at Bapi

https://www.kele.com/network-and-wireless/manufacturer/bapi.aspx

They have output modules for 4-20ma

Hey Gazoo,

Make sure you change the parameters in the right spot!!! Some are done in the drive head some are in the bypass. See notes below.

FLN WIRES
*************************
+ ON 27 (WHT)...

Thanks for the manual Reaper. So, if the TUX-450 is just dumb I/O and all the programs are in the existing Apex. How would I go about extracting that and implementing it in the BCM? Or can I iust...

Hi,

Looking for any manuals on the Alerton IDEX / TUX line of controllers. Have a site that currently has TX-450-ST and TUX-784-ST on heat pumps connected to a APEX DDC. Trying to connect these to...

The Insight software just has the manuals in the software unless you want an old 3.2 copy

ClarkBP,

Yep the report doesn't show much wrong at that point. As a suggestion can you release the following points and then initialize the TEC? Then attached the 99 point report the next time...

What is the part number on the TEC 540-105 or 540-105N. Makes a difference on how the setpoint dial and switch over works. Also can you attach the full TECs sub point report. 99 Points list

Can you drag that same point (TEC subpoint) to Commander (not Global Commander)? If so then yes you can put it in plotter, it will only show historical if its trended and collected. If you can't open...

dbushwar,

I tried the gdosbox on the Droid4 running 4.4 and was not able to get it to work. When accessing the config from the app it just keeps crashing. The user reviews for gdosbos on the play...

Good to hear its working. Thanks for the feedback

ibehvacr,

To test the airconsole and the adosbox you can go old old school. There was a dos terminal emulation program called kermit the would run a VT100 emulator. Here is the link to the...

Sounds like they stripped the serial emulation out of gdosbox to speed it up. Try installing the adosbox from the directions.

Did you try the SerialBot app from the play store to see if everything else is working, AirConsole / MMI cable?

https://play.google.com/store/apps/details?id=nz.co.cloudstore.serialbot

Set it...

Did a blood testing lab that needed a second signal into a system they called DCS. Looked like an old AB PLC system. We use a loop powered signal splitter...

The MBCs require different firmware to be able to use the ethernet port. You can't "hot swap" between rs-485 and ethernet like the PXCs.

I'd suggest making B02PC (node 0) the "main backup" in both system bln definitions and have the MAIN (node 95) as the "backup" in both system bln definitions. The reason for this setup is that the...

The WIFI & internet access can be solved if you have hotspot on your phone. Requires the Air Console be setup to connect to your phone WIFI instead of the way I wrote the directions.

Here is the full Drod4 to TEC setup. Do not ask me for the CIS software!

Mine was here;

/sdcard/app-data/org.hystuido.android.dosbox/.dosbox/dosbox-0.74.conf

martinsbt,

You try any of the guys on this post?

http://hvac-talk.com/vbb/showthread.php?183138-Signal-4-4-1-software/page2

CylonAmerican,

Thanks for the info. I'm going to try the IP controller "stuff data" into the BBC-SD and see how it works out.

Merkas

Was looking at the American Auto Matrix BBC-SD Bacnet display that is sold by Kele. I see that the display is a MS/TP device and by reading the manual can interact with BACnet points/devices on the...

Have you played with AutoHotKeys app. I posted about using it for a Siemens kiosk awhile back

http://hvac-talk.com/vbb/showthread.php?926502-Siemens-Apogee-PPCL-OIP-Command

The QFA3001.BU is a 3 wire device. (1) is DC+, (2) is DC-, and (9) is RH 4-20mA or 0-10V

You can till order a 2 wire version. Its QFA3001.WU-2W

I'm not very versed with Lon so bear with me. We have a building with a Lon network (6 devices) and then a RS-485 to fiber going out to another location with a fiber to RS-485. This second building...

Noticed you said you were setting up the page as A4 can you change this to Letter and try again? Tried it as a test and the A4 does leave a lot of "White Space" were the Letter was not to bad.

can you post an example, one of the live graphic and one of the print preview?

If its on windows 7 use the snipping tool to do a screen shot. May give you better results then the print function in graphics.

Switch print layout to landscape before you preview.

whart or bonzai . It was user configured

Using this on a laptop or android phone?
Setup on phone was load aDosBox update config file. Load DOS CIS files onto phone. Connect to Air Console XL WiFi. Log into the web interface for the Air...

you can't use serial bot. Load aDosBox from Google Play. Add the config line to the aDosBox .cong file. Did you buy an Air Console XL device?

serial1=nullmodem server:192.168.10.1 port:2167 transparent:1

It’s not really a Siemens App but I've been able to connect to a TEC with a Droid 4 phone. You have to load aDosBox and the old Siemens dos CIS software. Then use a WI-FI to serial device for the COM...