Type: Posts; User: nicksab
Search: Search took 0.00 seconds.
I am an end user.
Besides temp and pressure, i removed the bulbs on the txv valves and hold them in my hand to see if the pressure would raise but nothing.
I also tried to turn the stem valves...
I don t think the txv valves are the problem because there is two evaporators inside with their own txv valves and they are both acting the same
there is only splashing when the unit cycles on and off at the begining ( 3 or 4 times ). Then the sigthglass is full when the compressor is running but i have a really low pressure on the suction...
all the fans are going and temperature of evap is 58 F
I clean the coils already
there is a sight glass right after the filter/dryer.
there is a little bit of splashed when unit is running
Do you still have R401A? how much ? and do you ship to california?
I am having issues with my display cooler
Symptoms: cooler not going any lower than 62F and txv valves /distributor icying up on both evaporators.
Results 1 to 7 of 7