Type: Posts; User: deacon
very good sir.
Bald, when you're running them side by side, how much space is between them, and are they the same distance from the house?
I'm wondering if there is concern about the intake sucking up the...
all the praise goes to the install crew. they were top notch and I couldn't be happier.
thanks for the feedback on the p-trap, that makes sense.
all this talk of traps got me wondering if my set up is correct. I don't seem to have a trap at all.
any suggestions on fixing if it is a problem?
hmmm it seems there are some type of switches (a row of 4) on the board, but they must not be dip switches, i'm not really sure what a dip switch looks like. I'll have the tech make the switch. ...
ok double checked the coil number and the previous one I gave (RX8J24D17505) is the number printed on the unit (miss print?). The serial number is 7107E24062 if that helps.
I have another...
I'll cut off the elbow and have the exhaust terminate straight from the house. I'm with you Bald, I'm not familiar with ACD products but the Ruud seems like a nice unit, and so far is very quiet,...
no illusion been, it does. The flue was existing. Should I change it?
I'll double check the number on the unit tonight Bald. Thanks for taking a look.
I have a quick coil/condensor match up question.
coil is ADP rx8j24d17505
unit is Ruud uand024jaz
how does it look?
No they didn't bald, didn't have any cement in the truck and by that time it was too late to get any. I'll grab some today and do it up. Thanks for giving her a once over, I agree it seems like it...
Here are the pics of the install. I noticed last yesterday that the insulation does not cover the braze ons of the outside unit. Where can I get the closed cell foam that is used?
So what say the...
Well it was a long day, but they got the job done. I'll post some pics tommorrow (it was too late yesterday).
I feel good about the install. The guys that did the work were great and the ductwork...
exactly what I needed to know, I'll check with the installers to make sure it gets done. Thanks Bald
I'll post on the progress after the install.
Well the time has finally come. The crew is coming tommarrow to install the ac system. We are going with the Ruud UAND and RCFA coil.
Bald early on in this thread you mentioned that the installers...
I have an april air 550 on the return now that has a manual humidistat on at the unit, humid control might be nice. need the 7 day programability and various setback temps. Can take or leave the rest...
sorry for this slight high jacking.
Sam, I have a Rheem 60000 RGRK 92+ 2 stage furnace and will be getting a 2 ton Ruud UAND AC installed. What model number Honeywell vision pro and/or focus pro...
Thanks for the info tpa, I'll do a search for the totaline. It seems like the relays can be electronic instead of mechanical. Although admitingly I have no idea what I'm talking about
damnation, well that could be a problem. Any other recomendations for tstats? Preferrably quite.
After reading Cottys posts, I wonder if I should get a lower model Honeywell. Do they make a simpler 7 day programmable? It will be for a 2 stage Rheem RGRK furnace and Ruud UAND ac.
haha subcooled, maybe I do. The tstat is right outside the bedroom door. The Hunter clicks loud. I am looking at getting one of the Honeywell Visionpros, beenthere.
Is it worth to get the honeywell on a smaller (meaning not as complicated) system?
I like what I've heard about them.
Also is do they produce an audible click when the temp selinoid goes off....
I'm leaning more and more toward the company, I have no reason to doubt that they would do a clean install, and he included the out disconnect in the quote :)
good point heatpump. Come to think of it none of the contractors I talked to said anything about pulling a permit for this work. Seems like something I should check into.
DIY i was seriously contemplating that, but I feel like it might be disrespectful to the contractors, how do you pros feel?
Funny you mention that Mr H, when he stopped by to give an estimate for...