Search:

I have a room at one of our local hospitals here and all the med gas pumps are located in here. The room needs to stay below 105 F. The building wants an exhaust fan to remove the heat but I am...

Check the valves. If you loose one reed on the three at each cylinder you compressor will vibrate to hell.....but if you loose another one on another head....you will not notice a difference and the...

This is doen a lot where I live. You can purchase a twining kit from most manufactures. In fact.....if you wanted to do a gas furnace system that size, this was one of the only ways to do it. Without...

Installing an outside air soure into a system is never a bad idea if you do it properly. Until a few years ago you had to rig a system for a residential application. Now they specifically make an...

I have taken the course and have installed quite a number of these machines. When they first became popular around here, well, not popular but came around here, it was required you take the course to...

I dont think one will take over the other. It is all going to depend on where you live. Like chillermafi said, here in texas we do not require anything. Which is a shame because we do need some...

I am ot looking...but know people. Where are you located?

Hey man...great job. was your company part of the installation or just tech side?

I have fired up three in my life...none here in this country. Are there any here that you know of?

Do you do...

zzonko,

I find that name hard to type also! Sometimes being on the spot and have to come up with a user name that I really do not want people to know me, I use it. When I first looked on this...

zzonko,

no disrepsect taken.

bottom line is that we could go back and forth all day on why it will work and why it wont and what it says and what it doesnt like I have seen so many times. and...

http://www.precisionaire.com/FFI/FLANDERS.HTM

go to Industrial Air Cleaning Systems.....and I think is the Power Clean ElectrostaticPrecipitator with Auto Cleaning.

My comp. not letting me open...

The drain outlet on the air wash system of course goes to a interceptor, or trap. Being that a grease hood is required for a certain application, there will be a trap there as well. Once grease is...

TX....you must work in Dallas because of the link. Where do you work?

Most air wash systems I have come across usually has three sets of water/chemocal jets and then goes thru four banks of filtration and one electronic filter. They are usually a lot bigger than the...

Flexible canvas can only be used after it goes thru an air wash system.

Three plumbers (all related to each other) that work for me do that on every fitting they put together. I am with chillbrig...big pipe I understand, small pipe, dont know. But they do some of the...

sounds more and more like harmonic balance. If you adjust the leaving valve you should be able to stop that. The see what has changed in the system. A new valve, or new piping somewhere, or even the...

actually...my dumb a** just found it as soon as I clicked off this screen. I guess sometimes you have to read the fine print!

Restrictions are good! Thanks for the input. I have 13 years in the industry and own two companies in Dallas. I would like to get into a few different topics besides the basic help stuff. More of a...

You also could be experiencing (is that a correct spelling) harmonic balance. If you can check your pressure at your pump and at your water source unit that might be able to tell you. That or slow...

Look into Daiken as well

actually 10 months

Ira....not containing to this subject, but everytime I sit down to this site I have to leave before I get a chance to search...but how do you become a pro member? Where do you apply (i guess)?

if there is a central engineering near you, they sell an electronic tattle tail that can be used over and over. it has alittle light that goes off when it trips and a reset button on it.

some places also require it to bring up your eer rating, depending on the equipment