Search:

Very happy to reply. After a cleaning. It seems to have fixed it self. Not sure how. Even after the cleaning when the bin would close it took 1.5 mins. after drop to go back to freeze. Now 1.5...

Harvest is too long. Cleaned. Ice drops at 1.5. Doesn't go back to freeze till around 3.4. Is that right?

Thanks surenuff... How is one ever to learn at anything with out asking ?'s . Ok, at this point it's an over harvest code. (2 blinks). Now just trying to run down the cause.

?

New problem. When I leave I come back machine is off. Open cover harvest light is blinking and no water in tray. So, I reset. I stand around for 3 cycles so far. Done this 3 times so far. Every...

OK. I got it. It's the fill valve. When I bench tested, I couldn't blow air through it. Watching start up voltage I can see it supposed to open on voltage applied. When 120 drops out it still...

Normally open. Closes on power applied. Bench tested solenoid. It works.

Manitowic q454. The fill valve is not energizing. It just keeps filling with water. The sensor works, light comes on and goes off with level. Any ideas?

Thanks for your reply

btt

Does it benefit to have the outdoor sensor? My HP is single stage ssz14

Can you guys recommend a good stat with dehumid? Got a new Goodman AVPTC variable with a single stage 14 seer HP. I'm in Florida with heavy humidity. I was looking at the Visionpro. But which...

Looks like defrost winding...

Understand... I'll call Goodman

You're killing me.... I'd rather post on a message board and get the easy answer. These message boards rock..

That's not a nice reply..... I'm a sparky here. Cut me some slack. Don't want to bother my buddy for this. He is really busy.

I bought a Goodman avptc variable speed AH and a single stage ssz14 heatpump. I noticed when it ramps down the condenser fan runs slow for a bit. Is this right? or ok?

Manual J says I need a 2.5 ton. I currently have 4 ton. Is there a way to time the cycle of my current system with a set point and outside temp to tell if I am currently over sized?

75/91 70/40

I did a manual J for my home and it calls for 2.5 ton. I currently have 4 tons. I talked with one of the HVAC contractors that I work with from time to time and he said definitely 4 ton over the...

:cheers:

I am doing the the d work. I'm an electrical contractor. I work with a/c guys all the time. I've asked one that I work with alot if he can charge my lineset and exac my old one. I'm just doing...

Any reason you wouldn't do 24x16? 24 being the depth of the unit.

How hard is it to do a tight install? I could build a closet...Why not just do a good job at sealing up the db?

1 Just the plenum
2 Idn
3 I think ahu in attic sucks. Florida building code now requires carbon monoxide detectors if there is an attached garage. (good thing)
4 Idn