Search:

Is there any information available that would help me identify the function of the color coded wires in a class II transformer? Specifically a Jard 5032M or a MARS 44526 which are the same...

There is a 240V circuit that feeds my geothermal unit. If I wanted to check for amperage draw when the unit starts could I just put my test meter around both wires or would I have to do each wire...

My outside unit is a Trane XL14i. I just had the Trane service people here to find out why my AC would not work. Mice got into the outside unit and built a nest and a wire was knocked off what looked...

Will be doing one or the other. Thanks.

I have a HydroHeat Magnum geothermal heating unit. Model#03-069-WTWR-W-HM(410A Refr.) Serial #MG2X069WX2237198369. This unit has a feature in it that will heat water for residential use. I don't like...

Lets take a bore hole 188 ft deep with a loop of one inch tubing in the hole. Does seven bags of Benseal sound right to seal the bore? I know its not enough in dry form to fill the bore but what I...

Does anyone know how to find the manufacture date for a HydroHeat Magnum geothermal heat pump? I can't find it on the metal information tag on the unit. Is it some how coded into the serial number of...

The kid next door cuts my yard. I always put the cover on my outside unit before I cut the grass. I ruined a unit once with a stone thrown by the lawn mower. Kid put the cover on the unit when I was...

dash,
I think I remember some of that info from when I went over the manual for the thermidistat. I'll pull it out and go back over it. As for the installer, I would not call him back to do...

mrbillpro,
Right off hand I don't know what the run time is for the unit.


dash,
I have a real tight house. Had a guy come in last year and set up a blower door to check out the...

A few years back I had a new Carrier furnace and AC installed. I have had a problem with the house being cooled down but not enough humidity being taken out of the air. It's a 2.5 ton unit and my...

"Advanced Response"
Thank you for your input. It prompted me to check things out. I was just reading the manual for the Thermidistat and found that by setting DIP sw #4 in the on position...

"Advanced Response"
There is no wire hooked up to O/W2 in the Thermidistat(which should connect to W2 in the furnace). Have wires in the Thermidistat at points:...

I keep the thermostat at 70-72 during the day and turn it down to 67 at night. I have the Carrier Thermidastat. It was installed by the Carrier dealer.

I had a Weathermaker Infinity installed in Nov. of 2002(58MVP). I change the filter myself at regular intervals. Other than changing the filter I have had no checkups or service since it was...