Search:

We just started with Bidtracer about 2 months ago. Took a little bit for them to finish up small details we thought were going to work smoothly otherwise we are already seeing the simplicity side of...

Sorry, PCA controller.

Just spoke to our vendor about this and the pcs controllers. Looks like the end of May for release right now.

Tuscon,

Is this a branch only tool or method?

Only SCT that I know of. Maybe someone else can shed some light.

We have several running on different VM platforms. No latency if given the proper processing, ram, etc.

If I'm following you correctly, someone from Emerson needs to drop the correct templates into the site link before you will get anything. They should also hand you the template in PDF so you know the...

These work well. But there's still a few buttons some customers just don't understand....

Yes likewise.

Thanks

Got it. Thank you for the info.

Has anyone found a third party work around to do the same?

Sorry, I should have clarified. My intent was to reprogram or commission a UNT hanging on an FX60. I know with our NAE's it's possible with tools, just looking to do the same with the Jace. I did...

Hey guys, is there a version of the commissioning software that would allow us to upload, download, commission, etc.. Unt's or Vav's through an FX front end? Also would this allow us to do so...

Not the best answer here, but you could use 2 carrier etherlinks and pass over their network... Just food for thought.

I had a similar issue about a year ago with a site. Checked and found an updated driver for my monitor. Fixed problem instantly. Just food for thought.

Don't forget the link requires an i-vu plus as apposed to an i-vu standard also.


Sent from my Nexus 7 using Tapatalk HD

Probably lost the bus driver port

Thanks guys. We will give it another go around and see what happens.

On a similar subject, has anyone figured a work around to get PCT through an FX to work when it's at a remote site? Locally we are good, but anytime we go remote it's not accessible. (With pcg...

Last one we did had to be programmed by Emerson tech, then we were handed the PDF with the point names and away we went. Pretty easy. Actually harder to schedule the Emerson tech then anything else!

Are you sharing transformers? If so check to make sure all shared devices are phased the same....

Hey guys,

We have 2 Intellipak units that we want to adjust the Econ. min pos. It appears there are 2 terminals for a remote potentiometer. Does anyone know what the ohm range is on their...

I don't know if he is still around, but I was trying to sell a product called Matters Systems a few years back. This is an add to the site bms and runs it's own software. Another system that comes to...

+1 for google sketchup.


Cool stuff and not too hard to learn. You tube is full of demonstrations.

Ok. Sycontrol and igotworms both of you replying makes me think I am doing something odd on my end of the software. I will make time over the next few days to double check my procedures to do this....

Thanks phreak!!

Sycontrol,

We are trying to download and make changes to controllers that are out at remote sites often times to accommodate a customer change or request. This was seamless in...