Search:

Thank you Plain Spoken.
Any one see any thing wrong with getting a New Old Stock furnace if the price is right ??
Thanks, Mike

So far the best I can tell is its a Carrier Weathermaker 8000TS 58TMA ((( for California Only ))) What does this mean ?? I'm in Texas...
Thanks, Mike

Thanks for the link...but...no info about the UXT model..

Mike

I'm getting bids for a central heat / cool system changeout at my home. I can't find any info on the web about a Carrier 58UXT10020 gas furnace. Any links / info would be appreciated.

Thanks, Mike

Can anyone tell me the efficiency rating of this Trane Heat Pump condenser unit ?? MDL. TWB748A100A0, Sr.# B22291245, " High Efficiency Weathertron XE 800 ", manufacture date 5/87. Equipment runs...

I like the idea of using a condensate pump. I can now see the potential reguarding the high risk for a possible health hazzard. I don't want to re-route the condensate drainage to the yard or under...

Yes, the trap empties directly into the sewer line.
Thanks, Mike

Filling the trap with water has resolved the smell issue. Mineral oil will help make it last longer. This is a one story house with a crawlspace under the floor.... I read about an air-gap device...

I have an older Trane heat pump with electric backup. 4 ton. upright in a closet. For several weeks a bad odor has developed in the house. We bought / moved into this house about 6 weeks ago. I...

I like the idea of the Dwyer Gauge. What pressure range would be best for a home sysyem? 0 - 1, 0 - 2 ? Also, I wanted to use the High dollar ($20 -$30) 4 or 5 inch pleated filters (I need 2)because...

P. Student posted links to the exact "gauge" I was asking about.

There is an area in the central part of my home (a partitioned off back of a colset) about 1 1/2' X 4 1/2' which houses the 20 X 25 filters ( X 2 filters) and has duct work in the top of this space...

I'm a homeowner. I've seen some kind of an inexpensive "meter" for sale for about $15 that you place in the return air stream/system that you 'zero' when you place a new filter(s).When the...

Sounds much better, millerman, Thanks, Mike

I'm a homeowner, not an a/c guy. This might sound goofey but, I had a 94 Jeep Cherokee that had a TXV valve that made a very loud "trumpet-like noise" at idle rpm's. While sitting at a stop light for...

Glasfloss makes a filter similar to the Honeywell filter fat bob listed above. Has anyone had good results using 4 inch Glasfloss filters? Thanking you in advance, Mike

This makes perfect sense now. All I need to do is find a piece of sheet metal/aluminum 4" wide and 90" long (for a 20 X 25 frame) and I can make one of these, Thanks for your time and patience !!!...

Thanks DASH, So if I bend up 4 pieces of metal like you describe above, How do I connect them to each other to form a box? Aluminum "duct" tape? Thanks, Mike

DASH, I like the idea of making a new frame to mount a 4" filter in a 1" return air filter grill. My 20 X 25 frame could probably take a 18 X 24 filter? What should the new frame or adapter be made...

Long story short: Is it OK to allow the 'line-set' in my attic lay on top of the ceiling joists and insulation? I have a split unit in my attic in Fort Worth, TX. Thanks, Mike

Thanks Fat Bob & Dash! Sooooo, if my filters are 20 X 25 and I had someone make a new housing to "mate with" the origional housing I would have to use a filter slightly smaller than 20 x 25?? An 18 x...

Hi all, I've read somewhere there is a thicker pleated filter, I think 4 inch, made to fit a 1 inch return filter grill. This is suppose to work as long as there is actually several inches behind the...