Search:

I"m and old timer commercial refer guy, havn"t seen to much of inverter technogy, my home frig appears to have a bad inverter controller on a embraco comp., ordered a replacement, going to take a...

[QUOTE=pecmsg;26021892]Red Bull had it manufactured for them. Look inside for the manufacture.

Control Module could be anything[/QUO
ok thanks

im going to call it the control module. looks oem.

M#rb1-0bc1, anyone know where I can get parts for this?

Iv'e seen issues with this in kitchins with no a/c , humidity gets so high that the water level probe is sensing water thats not there

i have used the ice zone uv at subways, worked pretty good but the lamp needs replaced evry 12 months.anyone have luck with the chemical packs ?

Sorry I lost sight of this one, the solution is leaking in a few spots, cold car says if you replace one replace them all. Very labor intensive. Also I was wrong about the foam in the bottom of the...

yea icemeister thars the one, any body done one before, cold car tech support inst much help on this so far

yea spray foamed. the top of the rail is the solution plate , the refer line lays up against it, then the foamed in cover plate snaps into place on the bottom holding the refer line against the...

pecmsg. thanks. I think that is the older style. this is on a cold car body. Ill try to get the tech working on it to send a picture. this one has a series of skinny rails . there is a u shaped cover...

All attempt to send a picture

anyone replaced the plate rails on an ice cream truck, wer'e having a bear of a time getting the plate covers off. swans truck

couple of years ago I had a simuler situation and it ended up being an undersized condensing unit, it really throws the numbers off when we try to clear the sight glass, i would check the reciever...

idontgetit,
interesting, spray nozzles would be fairly simple thing to try.thanks

wouldnt i have the same result with a standard water coil, special ss coil maybe?!!

wev'e got a handfull of cow cooler customers,( a walkin cooler for show calfs, keeps the cows hair nice and thick). the evap coils only last a few years due to the gases given off from the feces....

years ago i worked for a good sized co. doing new installs for a large grocery store chain.Their installers were confused about nozzle selection,these were pipe fitters not techs.The co. philosphy...

thanks for your input all, the industry is changing. when i think iv;e got all my parts supplies down, new manufacturers move in from overseas, and the fun starts all over again, thanks again for...

sorry no pics, 230v 1 ph, its got a cope. scroll, which i didnot get the #s, this is on a swans ice cream truck, cold car M# is 37852 ip5j , s# luglio 2010. called cold car usa , they havnt...

trying to find a cond. fan motor for cold car cond. unit, looks like a copeland cu, no data plate on the cu. it has a ebm pabst a4e400-amo313 motor, looks to like big axial fan, anybody ?

i live in colder place -20 at times, have never worried about insulating the accumulator, have sen them insulated but I think it just for condensation purposes

I was told,many years ago by a scotman factory tec. that the cme has a complete plastic coating on the evap. and should use the stronger cleaner ( not nic safe). I know that the more recent cme evap...

if it seems right with you an God, you should go for it, life offers many doors- most people never even knock, let alone see if its open , you can always go back to what you were, good luck

most of the issues with the a12 controles that ive seen is from gases from rotting veggies, if their are better constant controles out there someone please speak up, 9 w motors are a different issue...

yea theses were really funky machines, ive ran into several of these over the years that would cycle the fan off and send the head pressure way to high, replaced the board, the sensors, and still...

the h10 is still the best detector for small leaksas far as i know,dont worry about the the r11 bottle , mine ran out 15 years ago. it is just a referance point. i have considered going to the h10...

the reason a reciever changes things is that its there to accept a wide range of out door temps.unlike a/c systems a refer. may need to operate at -10 f. out door amb.at that point the system needs...

sounds like internal releif to me also, you should have seen head pressure real high if thats the case

thanks for all suggestions. Kudos to those who advised to replace the drier, I really thought it was going to be the reciever- but decided to change drier because it was a simple thing to do. Idid ,...

thanks for the input, going back this morning to change the drier, for got to say the 1st thing i did was change txv head and check the strainer, sh is 10 f when I have a full sg, ive checked sc from...

ok, small walkin freezer, 6 x12 or so. custumer complait was running a little warmer than usual. another tech found that that system was 1# low on freon and low press. switcht was not shutting cu...

at this point you might consider spliting the systems up with each unit having its own cu. resize line sets as needed

no one is wrong here, except those who think their way is the only right way. iv;e come to a point where i read the customer, if they want the the cheap job done, as long as I can live with it so...

these are fun projects to work on, no pressure, crack open a beer, and play around for as long as it takes

yea im thinking a new cond unit and txv. is going to solve this problem, we dont have to have all the answeres, just the solution

ok, ive' got a 800 sq. ft. basement with a 250 sq. ft gun room, doors are barred off to the rest of the basement, but otherwise open. ive been able to keep the humidity below 47 % in the past, with...

the little beer coolers are the worst, a tiny 10' x 10' opening with no access to the sides or back. a couple of louvers punched into the side that always tight to the wall, you pull the cond. cover,...

At one time their were a lot of these machines around here, they were made just up the road in Spirit Lake Iowa. havnt worked on one in a couple years, as you cant get parts anymore and most are...

does anyone know of a manufacturer that still uses a txv, or have they all gone on the cheap with cap tubes?

thanks for the input, we found and repaired the leak this morning, it just knocked us back a day. I go into a project like this with a zero leak mentality, inspect every weld with a mirror and flash...

i used to drill a hole in the bottom and drain them into a barrel, there are auto shops that will gladly take the oil to burn in their waste oil heater. i found a local scrapper that will come and...

thanks everyone, im under the gun to get this one going. have had the ultra sonic setting in the shop for years, maybe it will finally pay for itself

im finishing up on beer whare house job . 21 hp, about 200 ft line set, i pressuer tested with c02 over night at 100 psi,checked the next day was 15 psi short, put vacume pump on for 24 hr, coudnt...

my rule is the 2nd plugged cap its time to go to txv. i ve tried the super sporlan cap tube drier doesnt do it, i'm fine with going outside oem if if I can Improof the situation. the 134a...

as I recall r404a and 507 are very close, to the same make up, they could mixed I think with out a problem, however technicaly they different freons- so I dought any one woul,d recommend it. if it...

I almost always install an inverted trap, especially on multi evape systems. It just insures that the coil wont get oil logged. Guess I dont worry on small systems as much, as long as the suction...

have carried co2 for blowing out coils for years, nitrogen for pressure testing. any thoughts on using co2 for pressure testing?

i have some bohn systems that run -35 f. they have a time delay that bypasses the lpc for stablilizing the start up , the heated reciever control would have to be a t-stat i would think. what is...

i have in pinch, installed a txv on the back side of the cooler and drilled a hole in the box, ran 3/16 copper between the txv and evap. it looks cobbly, but worked good.

great info. thank you