Search:

I have reset them by disconnecting R.

Dont have the numbers handy robo but most all Goodmans round here have them. I can see from the posts that there is no definitive answer. Seems some do and some dont. I was hoping maybe all do or all...

Can't pump it down. Switch is on outdoor unit.

IN my six years of service experience, I have never had to change a low pressure cutout switch on a heat pump. Do you have to evacuate to do this or does it have some type of valve under it. I'm...

you dont say.!

rollout or flame sensor?

Thanks for the number curry. Lots of help. Turns out the igniter I put on would have worked but someone before me retro-replaced the board with one that does not step the voltage down to 120 for the...

Wont likely get 21 years out of American Standard. Better get another RHEEM!!!

Just kidding, he he he

sounds normal for a lennox to me.

Understood, and thanks. I dont make stuff like this a habit, but I find it hard to believe that everyone who has been in this business for years has not tried temporary fixes to get someone by till...

BTW curry, these two mounted the exact same, the retro was 1/4" shorter but still long enough to ignite gas.

I agree but I seriously doubt she has the money.

So what do you do when you have no model, serial, or part numbers. You call your distributor and they're no help. And whoever was there before you cut the plug off and wirenutted a different igniter...

Retrofitted several as long as you get them mounted securely and in the right place they work just fine. Sometimes when your under the gun and people dont have heat, and the parts store is closed,...

I can tell you that it has an odd service door on the right side of the unit. It goes together with the corner of the unit using two 45 degree angles.

??? just a nordyne gas pack. Thats all I got except a model number off a parts list i found in bottom of unit. it is R2GA.

Tech. First nordyne.

I just installed a hot surface igniter on a nordyne unit. I couldnt find the exact one and all the numbers are washed off. so I retrofitted one that was close to that one. When I started the unit,...

Wasnt thanking you Dave, you dont seem to be smart enough to be of any help. Guys like you, who dont know how to do anything usually say stupid things. BTW "It is better to sit quietly and be thought...

Thanks!!!

Go out in the woods and practice for about 20 years before you try it. I know professional loggers who have had trees fall the wrong way and damage property as well as hury other people. I have cut...

No garbage disposal. Its just in bathroom sinks. only smells when water is running. Also on windy days, you can smell the vent gases outside. Is that normal? This is my first house with a 4"...

Just wondering what causes drains to smell like sewage. Thought it was the water but after putting some clorox in the traps, oder is gone. Trouble is, it comes back in a few weeks. This is a new...

Funny thing around here is that after all this trouble and work and fine tuning, the customer will probably never get it serviced and eventually dirty blower wheels and coils will change everything...

TXV will override line size

Pay the service charge, have a tech answer your questions. Not familiar with Carrier #s any more but you may be able to run a differant speed with the motor you have now.

Go Goodman. Great warranty, scroll compresser, and in NC, have been as good as any. I have installed Trane, Carrier, Rheem, Coleman,and Goodman. Have had less worries with Goodman but like them all....

METERING DEVICE!!! Change orfice..... pressure changes. Defective TXV.....Defective pressuers. The owner of a company ultimately controls what happens in that company because he is First in Line! The...

Just stirring things up a little, man. having fun doing it too. I am glad you corrected the spelling though. Honestly, I don't care what you drive. I wouldn't drive it because it looks girly. But...

coooool!

How in the world can you not spell R. West Virginia, right!

Ooooh. That was a ladder? I thought it was a surfboard!

Incorrect charge, Heat strips coming on, something else besides A/C.? Call a GOOD tech to check it out!!

Field transition at its finest!!!!

You could use a well pump to circulate refrigerant but it wouldn't cool the house.

Heat travels from a warmer to a colder ALWAYS. An air conditioner transfers heat from one place (inside) to another place (outside). This being said, in order for the refrigerant to transfer the heat...

manufacturer sent new coil with TXV. fixed everything. happy customer, happy contractor!!

thanks pro. Ill try that. Ive already got a coil on the way because I suspected the TXV. Need one shot one kill on this one. Lady is 76 and temps here are high. I didn't try adding freon. Whats the...

complete install. all old out and gone. new coil, lineset and all. Didnt try heat mode; no frost anywhere; I'm thinking TXV but scared to let it run long enough to really check it. Would the...

I just started up a new Rheem HP today and my suction pressure plummets to 0 within seconds. Head pressure 150, outdoor temp 100. All valves are open. Pressures won't equalize when I pull power. Any...

I went on a call today for a guy that had his nephew install new condenser for him. He said nephew works for HVAC company but couldn't figure out how to wire low voltage to electric furnace inside. (...

10'' duct in 30 sq. ft. bathroom? Wow! Never seen 10" supply in residential or boot to put them on. Registers must be at least, what, 6 x 16. I think I would install dampers in all of them.

Probably need to wait on buddy.

need more info. how big is house, subcooling, superheat, suction pressure, txv?,

Yea but who wants "sloppy seconds"

Theres a smart#@$ in every crowd. Sometimes its just irrestible though aint it.

HOME INSPECTION BEFORE BUYING. If she had one done, it wasn't a good one. If she didn't, well, thats all Im gonna say. It IS dishonest, I don't like it, but in 2005, it seems to be the American way....

I'll back up baldy on that.

Rheem/Ruud is a great choice when properly installed. If you have no experience with them, be sure you use correct liquid line size (sometimes they call for a 5/16 when you would think 3/8). I would...