Search:

Has anyone had any luck keeping a Saunacore commercial steam generator for a steam room? I have talked to the factory more then once and all they will tell me is that it needs to be clean and "For...

It already has one! We told them last year not to touch it, it will take care of itself. It still got turned off!

It is a boiler and it has froze. That's why they want it changed over. It's at a gas station/convenient store and for some reason someone always shuts the system off in the spring and no one thinks...

We are going to see how the pump works with the glycol beings the pump was new last year.
We had planed on turning the water off and disconnecting it so there is no chance for back flow into the...

Is there any thing you have to do to change a in floor radiant heat from a constant fill water system over to glycol system? Besides disconnecting the water supply I'm not sure if there is anything...

It has a 15 second purge time and then it opens the gas valve. I'm not sure what the first clicking sound is. The gas pressure was so high it blow itself out. it's working great now.

The pressure was a little high........ 15"wc! Got it adjusted to 4" and working fine. Thanks

I have a gas fired C-64A that is exploding every time the burners try to light on both the wash and rinse sides. It has new ignition control, wire, and igniter on the rinse side. The inducer fan was...

So what did you do to plug the hole?

Unfortunately, I've seen worse. Cleaned a Scotsman in a restaurant that was closed down for a year and then reopened without the owners even opening up the ice machine to check it before turning it...

Heat tape not working? That's always good for a few hours of work.

Thanks for posting that for me Willis. This was in the back of a convenient store. At first I thought they were installing them and just had them stacked up to save space, then I saw the line sets...

You can't get your second rack untill the Vista Cruiser gets it's first one buddy!!!:) Chad :p

It was the temp probe. Thanks for the help!

Thanks for the # markt

I'll try that. It's the only thing I haven't checked. Thank you markt

Thanks markt. The temp pot seems to be good, it runs 1025 ohms at the lowest temp setting to 0 ohms at the highest setting. I don't know how to test the temp probe. Do you? Chad

Thanks ice, I thought of that and jumped power right from the outlet and got the contactor to close. Chad

I have been working on a 1301 pizza oven that won't fire the contactor for the
heating elements. With the wires to the contactor removed I get the 208 volts that it needs to fire the contactor but...

Fryers suck. I always have to replace clothes after I work on them.

I see that all the time!! I had one last month that was like peeling a wool blanket off the coil!!!! It was still cooling some how!

Great!!! Now I'm hooked!!!

2%....Yellow Drill....I guess I'm a Dewalt man?!?!!?!!