Search:

Type: Posts; User: dpals

Search: Search took 0.00 seconds.

  1. Replies
    3
    Views
    322

    Sure. It is a Lennox XP 21 system with a matched...

    Sure. It is a Lennox XP 21 system with a matched handler. The basement zone is roughly 700 sq feet and main zone (living areas and one bedroom) is roughly 2000 square feet. Each zone is controlled...
  2. Replies
    3
    Views
    322

    Do I need to have my ducts adjusted?

    I have a recently installed heat pump system with electric resistance backup and an air handler that is located in the basement.

    The system has two zones: one for the finished basement and...
  3. RESOLUTION UPDATE: It was a loose screw! I...

    RESOLUTION UPDATE: It was a loose screw!

    I realize this thread has been dormant for a while but I thought it would be helpful to provide an update: The technician did come out and check the unit...
  4. Thanks for the guidance!! Per the above, I've...

    Thanks for the guidance!!

    Per the above, I've done some detailed monitoring of the system that last few days and here are my summarized results:



    Outside temp
    Run Time
    Time Between...
  5. I do have an outdoor sensor but I noticed that my...

    I do have an outdoor sensor but I noticed that my thermostat settings are set to only use the outdoor sensor for display only. Setting 0340 on the ComfortSense 5000 thermostat is set to "#1 Outdoor...
  6. Can you clarify? Did you mean to say "I would...

    Can you clarify? Did you mean to say "I would *NOT* use any setbacks"?



    I am going to do some detailed observation but I'm not clear what I should observe! Like I said, I've never seen the...
  7. Is my Lennox XP-21 heat pump operating efficiently?

    I live in SE PA and recently had a Lennox XP-21 heatpump installed with electric strips for backup heat. I received my first full month's electric bill and it was a bit higher than I expected (2100...
Results 1 to 7 of 7
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event