Search:

Type: Posts; User: farmerhunterjr

Page 1 of 3 1 2 3

Search: Search took 0.00 seconds.

  1. Ive been told by delfield flat out that their...

    Ive been told by delfield flat out that their units wont work with GFI outlets and breakers. It makes sense too because you have evap fans constantly getting dripped on by the water off the coil so...
  2. Replies
    14
    Views
    1,650

    That looks interesting if it does what it says it...

    That looks interesting if it does what it says it does. I might have to try some of that.
  3. Replies
    14
    Views
    1,650

    It doesn't help some of the solder nowadays is...

    It doesn't help some of the solder nowadays is cheap junk. I was in the middle of a 100 gal water heater install and ran out of solder. Usually I buy harris brand from the supply house but this was...
  4. Replies
    8
    Views
    474

    Thanks Space Racer! I knew there had to be...

    Thanks Space Racer! I knew there had to be something out there.
    I do disconnect them after using them its in use that they get knocked around. Theres not always something handy to strap them to...
  5. Replies
    8
    Views
    474

    N2 tank roll bar/cage

    Does anybody out there know where I can find a roll bar that will clamp on to a nitrogen and similar tanks to protect the regulator and gauges. Seems like every time they leave the van I end up...
  6. I cant comment on the play area of them because...

    I cant comment on the play area of them because Ive never been in one but we replaced a walk-in cooler door at one near me and I can tell you it honestly had one of the cleanest kitchens I've ever...
  7. Replies
    13
    Views
    778

    Somebody probably cranked to hard on it and...

    Somebody probably cranked to hard on it and stripped the screw inside of the valve off. I've seen this happen before. But what refrigerant is it? Its 404A it sounds low on charge for 85* temps.
  8. They do. Its the Casio Commando. I have beat the...

    They do. Its the Casio Commando. I have beat the living he!! out of this phone and it wont die. Its the first line of phones I've ever have last longer than my contract. Dropped screen down on...
  9. Yes both have Bluetooth.

    Yes both have Bluetooth.
  10. Any plans on making the app work for phones like...

    Any plans on making the app work for phones like the Galaxy S3 or Casio Commando?? I feel left out.
  11. Replies
    19
    Views
    756

    You just cant call a knife yours till you've cut...

    You just cant call a knife yours till you've cut yourself at least once with it :grin2:
    I didn't get any tools but I did a xm radio for my work van. No more scanning through countless stations while...
  12. Replies
    54
    Views
    2,054

    Make sure the tube that connects the pressure...

    Make sure the tube that connects the pressure switch to the inducer fan doesn't have a crack at the connections. I had one on a water heater that I about pulled my hair on till I noticed a little...
  13. Replies
    25
    Views
    1,306

    ^This for sure. I usually start with quizzing the...

    ^This for sure. I usually start with quizzing the owner/manager/cook as to what exactly the issue is. Other wise you might look at a freezer that seems to be running fine but the issue they called...
  14. Replies
    64
    Views
    4,171

    I carry one of these in the tool bag...

    I carry one of these in the tool bag
    http://www.amazon.com/Streamlight-75763-Stinger-Flashlight-Chargers/dp/B002VV7SFG/ref=sr_1_3?ie=UTF8&qid=1383184690&sr=8-3&keywords=streamlight+stinger
    And one...
  15. Replies
    24
    Views
    1,849

    Everything looks good but this ^^ jumped out at...

    Everything looks good but this ^^ jumped out at me too. That concentric looks a little to close to that old wood window that probably leaks air like a sieve.
  16. Replies
    16
    Views
    1,221

    http://www.amazon.com/4-Piece-Mini-Cushion-Grip-Sc...

    http://www.amazon.com/4-Piece-Mini-Cushion-Grip-Screwdriver/dp/B000MKMIH6/ref=sr_1_1?ie=UTF8&qid=1382141428&sr=8-1&keywords=klein+mini+screwdriver
    Part #KLE85484
    I've got a set of these that have...
  17. Most of the supply houses near me have these type...

    Most of the supply houses near me have these type fittings. Some have a depressor built in like the one I linked but others don't, so make sure you get the right one....
  18. Replies
    15
    Views
    1,148

    I still use my gauges for evac on small units. It...

    I still use my gauges for evac on small units. It just doesn't make sense to pull out the CRTs and hook it all up on units that the charge is measured in ounces not pounds, plus I have the sman3s so...
  19. Just make sure your feet aren't wet when your...

    Just make sure your feet aren't wet when your playing with wires lol
    Yesterday I was retaught that lesson when I thought I could replace a low voltage limit switch ..... in the rain.... kneeling in...
  20. Id try to get a OEM from a supply house, if that...

    Id try to get a OEM from a supply house, if that fails take the SD one you have into a electrical supply house to show them what your looking for, if that fails cut your loses and wire in a...
  21. If that doesn't work hit it with the torch for a...

    If that doesn't work hit it with the torch for a min and then hose it with some kroil oil as it cools. That's what I did with some 1000v rated insulated pliers and nippers somebody gave me because...
  22. Replies
    25
    Views
    1,393

    If only a quarter of the evap is frosting I bet...

    If only a quarter of the evap is frosting I bet its the txv underfeeding,(if there doesn't seem to be any restriction anywhere else) try opening it up and see what happens. Have you looked at the...
  23. This is great advice! There have been quite a few...

    This is great advice! There have been quite a few Monday mornings I showed up to my first service call and realized my tool bag was sitting in my personal truck because I was helping a friend out on...
  24. [QUOTE=Stayte;16788851]Thanks for the tips! ...

    [QUOTE=Stayte;16788851]Thanks for the tips! Couple of questions.

    First, how does the Klein bag compare to the Veto? Quality? Weight? Room? I have looked at that Klein Extreme and all of the Veto...
  25. Replies
    8
    Views
    496

    Charge it to beer can cold, DUH :grin2: haha If...

    Charge it to beer can cold, DUH :grin2: haha
    If its a cap tube I would charge it to 10-15* superheat at the evap while its warm, and a subcooling of 10-12. Once it gets down to temp the superheat...
Results 1 to 25 of 52
Page 1 of 3 1 2 3
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event