Search:

I bought the 4 door Samsung refrigerator. Milk will not stay cold and the icemaker with ice through the door freezes up. It does not harvest all the ice and water spills over and clogs it. The only...

👍👍👍👍

The customer bought the wrong tstat. It's that simple


Sent from my iPhone using Tapatalk

If it is one of the high efficient systems, 12-13 seer, the head pressure might be 20 degrees above ambient. The 14 and up seer rated units could have 10-20 degree above ambient


Sent from my...

Down where I am, if the building has multiple stories, the outer zones, get heat and cooling. The inner zones get cooling only.

If it was me, I'd have the building owner pony up the cash to have...

That's understandable about the data plate. If you knew that info, with a weighed in charge, you could add what little it needs for the line set


Sent from my iPhone using Tapatalk

The idea I believe is that when you get a coil close to 55 degrees the airflow is so low that you still get cold air. And remove humidity


Sent from my iPhone using Tapatalk

That would have been a perfect time to weigh in the refrigerant to what was on the data plate


Sent from my iPhone using Tapatalk

Why didn't you weigh in the charge?


Sent from my iPhone using Tapatalk

Well that's why I generally pay one off and keep it 10 - 15 years


Sent from my iPhone using Tapatalk

I learned something today, I never heard it called kindorf


Sent from my iPhone using Tapatalk

It is a good time to buy a used sedan.

I prefer to buy new, and either pay it off and keep it awhile or trade it in after a couple of years. You get a better price if you do it before 36,000...

Hot water is on the left, Cold water on the right and crap runs downhill


Sent from my iPhone using Tapatalk

Looks good


Sent from my iPhone using Tapatalk

Do you have to drill out the rivet to get the panel off


Sent from my iPhone using Tapatalk

Thats very true as I've been on roofs with more then 15 units. I'd remove the screws with a drill motor but I liked to put them back with the driver.

That being said, we were provided all the...

Whats wrong with a nut driver


Sent from my iPhone using Tapatalk

Those are topics that were originally in the General Discussion Forum. They were moved to AOP after comments were made.

What does AOP stand for


Sent from my iPhone using Tapatalk

My dog can hear a piece of plastic coming off a slice of cheese from a block away.

If you could get a leak to sound like that, along with scent. I'd say yes


Sent from my iPhone using Tapatalk

That's a question better answered by your accountant or tax attorney.

I was under the impression Your business was all you did


Sent from my iPhone using Tapatalk

I believe the government lets small business expense a vehicle up to $100,000


Sent from my iPhone using Tapatalk

I fail to follow. Buy a work truck, expense it for5 years, then sell it. Let the government pay for its use then pocket the final sale


Sent from my iPhone using Tapatalk

Then take a rubber mallet and smack it a couple of times or place a block of wood on the compressor and hit it with a regular hammer.

I need to keep you in mind the next time a light bulb in my...

You don't have a compression ratio. The valves are bad. You could scarf a usable compressor from another system that has been junked, repipe it in to the unit you have and maybe get more time out of...

Compressor is bad. You said Janitrol. That's very old.

Ethically a new system is what's needed


Sent from my iPhone using Tapatalk

New system


Sent from my iPhone using Tapatalk

Watch this.
...

That cost almost $500. I got the X13 for nothing


Sent from my iPhone using Tapatalk

You should take one apart if you refer to the X13


Sent from my iPhone using Tapatalk

I don't have the module on it. Look at the schematic on the motor. The motor does not have windings like a psc motor. It's just wire wrapped around a steel core with a magnet spinning inside of it....

Neither, but once I figure it out I will


Sent from my iPhone using Tapatalk

Yes I could, but I don't have one of those


Sent from my iPhone using Tapatalk

Check the taps on the transformer, they generally come from the factory at 240 volts. If your electricity comes in a little high due to a surge it will cause the breaker to trip


Sent from my...

I'd tell them to give me my old unit back, take what they installed and leave. Then get a more reputable company to install a unit for you


Sent from my iPhone using Tapatalk

What is your primary voltage. 240 or 208?


Sent from my iPhone using Tapatalk

I was not going to store AC current, I was going to use it as it was made. The battery is to store DC current and use an inverter to make AC

But if I figure it out, I'll let you drive me around
...

I don't know what one of those is, but if you can spin the shaft with a drill motor and measure voltage at the leads you propbably could if the wind would spin it also


Sent from my iPhone using...

First attempt is a failure. I'm going to have to reverse the fan mount as the motor is too heavy & the normal 15-20mph wind has disappeared...

Ok, never thought about the magnetism.

As it is, I have a blade from a condenser I've almost got the motor attached. I'll put what I have on it and see if the wind will turn it fast enough to...

I know that I can spin the shaft with a drill motor and generate voltage. I used a high speed drill and actually exceeded 300 volts. On the motor it shows using terminals 1-5 and Common creating 25...

Yes you need a specialist or your everyday AC tech will do it


Sent from my iPhone using Tapatalk

I worked at a Mechanical Contractor Company for about 3 years.

The boss would say stuff like " don't let that boiler scare you".

Then we had a pump on a latent storage system that was acting...

Thats the word. Hoffmann. Thanks


Sent from my iPhone using Tapatalk

I don't see any of the bleeders, for lack of a better word, that we used on a system we installed in a 9 story building. They purge air out of the pipes when the pump is not running.

I don't...

Check pressures & temperatures, indoor and outdoor air. Amp draw vs RLA and write it down. Check everything 5 times a day. Draw a conclusion


Sent from my iPhone using Tapatalk

Probably that little lead plug in the compressor, I always heard a lot of refrigerant could get out of one. BTW, I thought liquid lines went from a condenser to an evaporator or chiller barrel

...

My son just called me about a Samsung. The one with the Google device or TV on the door. Said it listed for 5k but they wanted $200. It was missing the compressor.


Sent from my iPhone using...

I've heard the same thing. The one I bought has been trouble free


Sent from my iPhone using Tapatalk

Sign up for working in installs as a helper. If you know your stuff it will come out in the wash and when the dui's come off your record, then you can advance. A good tech should know how to install...

Ok, never considered the electric fan used in todays cars. I was stuck in the 70'-80's when the radiator fan turned all the time and put some air over the condensor


Sent from my iPhone using...