Search:

Type: Posts; User: NSSF

Page 1 of 2 1 2

Search: Search took 0.02 seconds.

  1. Replies
    3
    Views
    285

    hallo, This watchdog timeout is configurable...

    hallo,
    This watchdog timeout is configurable somewhere? I don't believe this can be caused by an unreliable lets say interlock or global data... Maybe from a non-object configuration? One colleague...
  2. So time is not the issue, maybe for me it was...

    So time is not the issue, maybe for me it was after the authentication login. So it must be either your IP address, the nae computer name (on network tab) or the password for log in (have you changed...
  3. It's the time zone in SCT, the Time Zone in...

    It's the time zone in SCT, the Time Zone in Windows and the time zone and time in NAE. SCT time comes from your windows.
  4. No, the SCT needs restart for sure. The time zone...

    No, the SCT needs restart for sure. The time zone is the same with your PC? Try to match them and i think it will work
  5. Replies
    3
    Views
    285

    NAE 'Software Watchdog' restart reason

    Hallo,
    does anyone know what's that 'Software Watchdog' restart reason (focus tab in NAE55) stands for? I assume that one possible explanation is when the datapoints exceeds normal (ok,normal for...
  6. The password you set at site authentication is...

    The password you set at site authentication is the super user metasys password? I guess yes. Check the time-time Zone of your SCT (pc) and the NCE. I had some issues uploading when they are not...
  7. Replies
    6
    Views
    370

    Thanks, it worked! lol

    Thanks, it worked! lol
  8. Replies
    6
    Views
    370

    Jace Communicating Modbus via GPRS

    Hello everyone,
    i would like to ask if anyone has tried to put in a JACE let's say a modbus network and at the COM of JACE modbus properties to put a GPRS modem, that it is connected as a card to...
  9. Replies
    18
    Views
    1,384

    Sometimes you have to override the do despite the...

    Sometimes you have to override the do despite the fact that inside the GX tool the DO is connected with a DCO or most common with an LRS. Like you do from DX's local display. This was happening with...
  10. Replies
    18
    Views
    1,384

    Good to know that the do override works for Jace,...

    Good to know that the do override works for Jace, even if it is JCI branded. So for my case it must be the vendor's driver since it's not JCI Branded. I ll have to contact them.
  11. Replies
    18
    Views
    1,384

    DX9100 and Tridium Jace

    Hallo everyone,
    Recently i had to replace an old metasys (NCM) with a tridium Jace. The field controllers are DX9100 series. It seems like i cannot 'override' the Digital Outputs (DO) of the DX,...
  12. Replies
    10
    Views
    1,381

    Indeed, we also used Distech Jace as a BACnet...

    Indeed, we also used Distech Jace as a BACnet Router to download to FX BACnet series from FXComProBacnet. It doesn't matter which company is used as long the protocols are the same.
    PCT is CCT...
  13. Replies
    10
    Views
    1,381

    We were also BIG fans of JCI FX controllers, did...

    We were also BIG fans of JCI FX controllers, did everything with it, but we were announced that they are discontinued.... FEC/FAC series seems a little trouble, too complicated tool for no reason.......
  14. Replies
    10
    Views
    1,381

    Thanks, good to know. Nowdays i am testing EasyIO...

    Thanks, good to know. Nowdays i am testing EasyIO controllers with Distech EC-Net, there is compatibility.
  15. Replies
    10
    Views
    1,381

    Niagara Configuration Tools

    Hello everyone,
    i am wondering if the niagara platforms Tools are common for all Jaces. For example we use EC-Net for programming distech EC-BOS, can i program JCI' FX Series or Honeywell Jace with...
  16. Thread: Jace Audio Alarm

    by NSSF
    Replies
    0
    Views
    299

    Jace Audio Alarm

    Hello ,
    we are trying to put a sound file in order to have an audio alarm in a field point, in a Tridium jace. We see that this audio file plays only once.... Is it possible to make it sound...
  17. Replies
    8
    Views
    1,530

    The fx you have for sale are BACnet MSTP? If yes...

    The fx you have for sale are BACnet MSTP? If yes sent me e-mail for further details
  18. Replies
    8
    Views
    1,530

    Thanks XRRIDER, i 'll keep it in mind... I m,...

    Thanks XRRIDER, i 'll keep it in mind... I m, just seeing the problem in the future, now it is just seems to arrive! The fx you yave are N2 or BACnet MS/TP?
  19. Replies
    8
    Views
    1,530

    I am just saying that in the future, if FX series...

    I am just saying that in the future, if FX series is either vanished or highly overpriced, you 'll need a lot of work just to replace one let's say damaged FX14 in an already constructed board. Ok...
  20. Replies
    8
    Views
    1,530

    Actually we are looking for a good field...

    Actually we are looking for a good field controller, N2 or Bacnet or Modbus except FEC that we already know....
    For the replacements i would like to believe that Johnson would keep some spare parts...
  21. Replies
    8
    Views
    1,530

    JCI FX series Replacement

    Hello,
    i would like to hear your opinion about the replacement of the JCI FX series controller. The new FEC/FAC series is the only solution? I am not really a fan of CCT tool, comparing to the...
  22. Replies
    17
    Views
    3,313

    bigguy158 for the moment i use Px with the craps...

    bigguy158 for the moment i use Px with the craps of Java in my life and the safety issues.... Fortunately, we solved the problem with the missing backgrounds in this post... Indeed, the Hx for...
  23. Replies
    17
    Views
    3,313

    Web service of the controller? Or somewhere in...

    Web service of the controller? Or somewhere in the pc settings? Couldn't find anything in the controller, in the PC i am pretty sure i could miss something.....
  24. Replies
    17
    Views
    3,313

    How can i not use SSL? The SSL option in my java...

    How can i not use SSL? The SSL option in my java settings is not enabled. Is there another field or in another menu to disable SSL? Is this secure? :angel:
  25. Replies
    17
    Views
    3,313

    In the 'Niagara Runtime' field says 3.7.106.1. ...

    In the 'Niagara Runtime' field says 3.7.106.1.
    I found out that at the exception of sites only the Local IP need to be added, when i connected to an external IP my computer didn't show me any fault...
  26. Replies
    17
    Views
    3,313

    Ok, the 'set applet reload' worked perfectly. ...

    Ok, the 'set applet reload' worked perfectly.
    Now the question that comes up is what's the best solution for the untrusted sites? For us that log on to many sites seems a pain to add every Niagara...
  27. Replies
    17
    Views
    3,313

    It's in the config-services-users service-user. I...

    It's in the config-services-users service-user. I 'll try it, seems a good idea....
  28. Replies
    17
    Views
    3,313

    Niagara and Java Issue

    I am trying to find a solution for booletproof browsing in niagara and Internet Sites, without having to tell the customer not to update Java. Especially now that every internet page loads some...
  29. Replies
    4
    Views
    864

    By trying and deleting part of the files i found...

    By trying and deleting part of the files i found out that one of my background pictures (.jpeg) caused the transfer error. It was NOT written in US keyboard... Case closed
    Thanks and be careful...
  30. Replies
    4
    Views
    864

    Ruchc03 i just tried it with no luck.... i made a...

    Ruchc03 i just tried it with no luck.... i made a station copy in another project last week so i don't think it is my laptops's problem.... Maybe are some points that are not existing in my database?...
  31. Replies
    4
    Views
    864

    Error message in Niagara station copier

    Good morning everyone,
    i tried to make a back up in my Distech EC-BOS (Niagara Platform) and in the station copier while transfering all files i get an error File not transfer and the message...
  32. Thread: JCI CCT FAQ

    by NSSF
    Replies
    8
    Views
    1,451

    First serious, let's say, program ready and...

    First serious, let's say, program ready and working! Still naming ACO and DCO my constants:yes:, but who cares, i can built logic my own way and keep it simple.
    Thanks guys for the ideas ...
  33. Thread: JCI CCT FAQ

    by NSSF
    Replies
    8
    Views
    1,451

    DDClifer, thanks, i 'll keep that in mind....

    DDClifer, thanks, i 'll keep that in mind....
  34. Thread: JCI CCT FAQ

    by NSSF
    Replies
    8
    Views
    1,451

    Cagey, yeap, i tried it... Still seems too much...

    Cagey, yeap, i tried it... Still seems too much information for just small control systems, i think the logic won't work leaving unconnected most of the input parameters that you don't need or you...
  35. Thread: JCI CCT FAQ

    by NSSF
    Replies
    8
    Views
    1,451

    I think i will proceed with my own macros-logics,...

    I think i will proceed with my own macros-logics, too many parameters for a simple job that need to be done....
  36. Thread: JCI CCT FAQ

    by NSSF
    Replies
    8
    Views
    1,451

    JCI CCT FAQ

    Hello everyone,
    I am trying to program with the JCI CCT, to go along with FEC-FAC. What's the idea of the outpout logic feature, miscaleneous and state generation? When i saw them at the beggining i...
  37. Yeap, i just tried with JCI sitebook and when...

    Yeap, i just tried with JCI sitebook and when browsing the device i had the same issue, error and only one point read and mapped with the name 'text'. I just saw that the KNX programmer hasn't named...
  38. one correction -in the field is v6.1...

    one correction -in the field is v6.1...
  39. in the field the NCE2510 -to be accurate- is...

    in the field the NCE2510 -to be accurate- is v5.2, in the office that i tested it is v6.5. I used both ISO and ANSI encoding type with no luck...
  40. JCI NAE-Auto Discovery with Siemens KNX to BACnet

    hello everyone,
    i want to integrate into my JCI NAE as BACnet IP a SIemens 5WG1 143-1AB01 KNX to BACnet/IP. Seems to work, the only problem is that Auto Discovery in NAE crushes so i have to insert...
  41. Replies
    9
    Views
    1,144

    You are correct, the 'enum' type gives me the...

    You are correct, the 'enum' type gives me the states text feature... The logic is boolean so,assuming normally i guess, i added a boolean network output. So, if you cannot change the text of a...
  42. Replies
    9
    Views
    1,144

    JCIman, my CCT version is 5.3.0.6500 and can...

    JCIman, my CCT version is 5.3.0.6500 and can download on nae/nce version 6. As i can see your CCT version is different/higher cause on the Network Outputs i don't have the tab 'display' with the...
  43. Replies
    9
    Views
    1,144

    Thanks for your reply, i understand your answer...

    Thanks for your reply,
    i understand your answer but i still cannot find the field to change it, i went in the logic but no scroll down with state texts appeared as i imagined on the network...
  44. Replies
    9
    Views
    1,144

    JCI CCT States Text

    Hello everyone,
    I am trying to get into CCT of JCI, trying to go along with FEC-FAC controllers. I am just trying to configure the states text (changing 'off/on' to 'close open' let's say)of a...
  45. Replies
    0
    Views
    587

    JCI NAE with Daikin D-BACS

    Hello all,
    in two projects i had to integrate DAIKIN D-BACS (BACnet IP) to a JCI controller, NCE25 and NAE45.
    When i tried to auto discover the D-bacs with the NCE (about 1000 points in d-bacs)...
  46. Replies
    1
    Views
    493

    BACnet Loop point in JCI NAE

    hello everyone,
    I have a BACnet/IP fcu controller of distech controls and i want to integrate it in an JCI NAE. The problem is that the setpoint point is a loop point (i saw it with a distech...
  47. Thread: JCI NAE features

    by NSSF
    Replies
    11
    Views
    1,863

    i have the Branch Purchase Package but i don't...

    i have the Branch Purchase Package but i don't think it is in it. Maybe it's in a different package?
  48. Thread: JCI NAE features

    by NSSF
    Replies
    11
    Views
    1,863

    JCI NAE features

    Hallo everyone,
    I would like to ask if someone knows if there is a way to do mass interlocks or multi commands in a text way somewhere hidden in the jci NAE controller, connecting with remote...
  49. Replies
    0
    Views
    1,089

    Fidelio (fias) to BACnet/Ip

    Goodmorning,
    I would like to integrate a fidelio opera (fias protocol) to a Johnson Controls MSEA with NAE's and ADS. I am thinking of installing a converter (fias to BACnet/Ip), seems a clear...
  50. Replies
    2
    Views
    946

    Good morning chas_md Indeed, i need to get from...

    Good morning chas_md
    Indeed, i need to get from opera the occupancy of the room as you said. If they have a server (i don't know yet) that has an output of BACnet/IP i would be extremely happy cause...
Results 1 to 50 of 95
Page 1 of 2 1 2

Related Forums

Plumbing Talks | Contractor MagazineThe place where Electrical professionals meet.
Comfortech 365