Search:

If evolution control is used, go under equipment summary, you will see the a/c tonnage. If standard t-stat, you have to use the dip switches.

If it's an evolution a/c, the control recognizes it. If non evolution a/c you have to program in the tonnage.

amen

look at a honeywell iaq

I've seen this problem twice, and both units had high static pressure. Our co. fixed the static problem and haven't heard about any more temp. problems. In fact, I took one of the interfaces and put...

Fish down a wall? You make it sound simple.

I've read a post about changing the fixed metering device on rtu's with a txv, and I like that option, but someone said that they have used a heat gun on the distruibiting tubes, due to a problem...

so if the new motor is making the same noise as the old one, what makes you think you have a problem ?

Thanks jrbenny. This will come in handy.:)

Is this a Pro Fourm question ?

At what static pressure triggers the " replace filter " message on a Bryant Evolution control.

I had a customer with an '05 Evolution system, the UI was an non -A. A couple of weeks ago, she...

I live in OH. and duel fuel is becoming very common. Can't help on the sizing.

Thanks, thats what I was trying to say.

With my wife, I might have to out a low ambient kit on my a/c. She likes to keep it at 70 or lower no matter what the outside temp is.

You got me.
I forgot about the airhandlers.

part numbers are part numbers

The one thing I see is the filter box placement. According to the install instructions, on a horizontal or downflow, the return should be coming in from the bottem not the sides.

Sorry, I...

Just throwing this out there, what about Westinghouse.

It's sounds like they were using a flat rate pricing book, which is national average. I can't see the job from here, but sounds reasonible. By the way, I didn't think prices were allowed on this...

Our company has been installing these t-stat's for about two years now. I have only ran across 1 that has had a problem with the screen, only half of the screen was displayed. I like them personally...

If you are going to change the in side coil, go ahead and bite the bullet and replace the outside unit to match. Just because you have a 19 seer coil doesn't mean you are going to get 19 seer out of...

I went on a no heat call this past wed. It was a williamson tallboy, downflow, oil furnace. I was in the furnace for about a half hour and didn't hear any strange noises. It was time to fire the unit...