Search:

Type: Posts; User: adam80821

Search: Search took 0.00 seconds.

  1. I forgot to add to make sure plunger moves freely...

    I forgot to add to make sure plunger moves freely as they can hang and not close all the way. Just use a little scotch brite to polish plunger and body never sandpaper
  2. things to look for would be of course rubber torn...

    things to look for would be of course rubber torn but also any abrasions at all will let water thru also look at the plunger in the top. Is the spring on top? Does the rubber in the end look smooth...
  3. 1- could be one of two fill solenoid (brass)which...

    1- could be one of two fill solenoid (brass)which is behind panel and feeds water to booster or drain valve which goes to drain (drain solenoid white plastic) not sure of third wire unless its green...
  4. rating wouldnt change or at least would be a...

    rating wouldnt change or at least would be a minor concern. Not sure i would trust dayton valve but for 35 bucks it would be worth the risk. I am kinda spoiled in that i have three or four kits on my...
  5. Replies
    3
    Views
    1,798

    there are led's on the main board that will tell...

    there are led's on the main board that will tell you what probes are seeing water. I have seen soap get into the plugs behind machine and completely foul everything up.
  6. rebuild kits will work fine. My question is how...

    rebuild kits will work fine. My question is how hard is the water. That will determine more that most everything else how long it will last. lime in the tank will break off and first place it...
Results 1 to 6 of 6
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event