[QUOTE=kangaroogod;25779385]What is the brand and model# ? What temp and humidity are you maintaining in the space?
It’s a Coaire 12000 btu CIH-12M1Z. The room is usually kept at 75 but the...
Type: Posts; User: daviddsims
[QUOTE=kangaroogod;25779385]What is the brand and model# ? What temp and humidity are you maintaining in the space?
It’s a Coaire 12000 btu CIH-12M1Z. The room is usually kept at 75 but the...
Living in a humid area, the unit is oversized and doesn't run long enough for de-humidification.
We have an office that is barely 100 square feet and has a 12,000 btu mini split that is way over sized. The unit is full of black mold and in need of serious cleaning. At this point, thinking of...
I completely understand economizers and deal with them at a large industrial factory I work in. Residential is much smaller and outside air ventilation is not common here in most homes. I am just...
Guys I have a 3 ton Bryant gas furnace unit I would like to add an outside air damper to bring in fresh air and cool air in the fall and spring. This is not common on most units in the south due to...
Yeah I am getting right around 20-21 degree drop on the coil. I was really surprised the static came out to that even with the leakage. I did find a lot of air blowing out of the coil cabinet where...
Sorry I wrote the wrong static pressure. It was actually .65 and I put the probes between the air filter/blower and in front of the evaporator. The system is a 3 ton Bryant with 1200 cfm blower.
Surprisingly my TESP test came out to .55 for the system. I was pretty shocked to say the least.
I moved into the same neighborhood in February into a new construction as well and was too late to have input on the AC. Although mine is a different contractor, you still can see the installation...
Everyone talks about balancing the ducts but I could honestly say none of these new construction contractors even know what air balancing is. I work in an industrial environment and for the most...
I honestly think the contractor would defend this since there are very few examples of what "right" looks like. I'm quite sure there is no manual J or D and was just rule of thumb sized.
I almost want to tell the homeowner but I'm sure they got the cheapest price possible and this is what they got.
I'm not picking on this one guy because they pretty much are all this way.
Sadly this is almost every new construction home I come across in the area.
...
My unit is installed in the attic and a P trap is used but on the T section is blowing out cold air on the top. Shouldn't a cap be on if used on the positive side of the fan?
I recently moved into a new construction home and was too late in the game after HVAC was installed to get the options I want. The builder installed a Bryant single stage gas three ton unit for my...
I am replacing a York 3 ton Microchannel Condenser with a standard Goodman or Tempstar outdoor condenser. The York LX is only five and half years old and has a new aluminum evaporator coil so it will...
My mother in law has a 3 ton York air handler in the attic that has been changed out once last October and now has another leak and must be changed again today. The installers showed up and I kept an...
I just got charged labor. The only good thing about this is I know what I am looking for when I build my new home next year.
This was a brand new subdivision at the time and the installing company did them all from scratch. I would say it's on them.
Five years almost to the day of install.
Funny thing is I put it on the lowest and didn't notice any slower speed. I even took all readings on the wires each time and it was the same.
Quite the racket Doug...
I have not checked the static pressure on the system but judging from the install, it is probably pretty high. I am actually selling the house this summer and will be building a new one. The whole...
I just changed it to blue and then red afterwards with no speed drop. I even amped the wire and no amp reduction on the fan. Very strange....
The X13 indoor blower motor finally quit working in my home unit so I called the company that installed the York unit when the house was built so I could get warranty on the motor. The tech came out...
I have plans on a website that just has the floor plans and outside pics. Haven't committed to the price yet but do love what I see.
Great advice everyone. The timetable posted for planning is really helpful along with the advice on hot humid LA. We will be building in West Monroe energy rater..
Guys my friend is building a new home approximately 2300 heated sq feet and I will be doing the same in a about two years. I deal with Industrial refrigeration at work but rarely delve into...
We had a York 70 ton chiller installed on a closed loop chilled water system about two years ago at my plant. This chiller has a total of two circuits and each circuit has three compressors. Within...
Looks good but I am considering the Testo 417. I kind of like the idea of having the vanes vs the hot wire.
Just curious if anyone has a meter that will automatically convert FPM to CFM? I have a cheap Extech anomometer that does FPM but not CFM. Any recommendations?
Does anyone know of any free HVAC load calculator software? I am at an industrial plant and have a 70 ton York chiller that outputs 46 degree air into a room with product. I am trying to keep this...
What is your ideal ranges on a galvanized tower? Just curious if you are treating it what are your limiting numbers on alkalinity, ph, hardness, and conductivity?
I was a little worried with the amp draw at 12.5 and still getting into the hottest part of the day. The FLA was 14.4
The outdoor unit has superheat charging chart so I used my Fieldpiece HG3 to get a 12 target subcool. Tell me about LL temp - outdoor rule you referenced?
So what is the consensus on this unit? Even adding refrigerant having trouble getting to the 10 degree subcooling on this unit?
Yeah I should have taken it at the evap as it does run through the attic and it is 103 here as well.
No it is not a heat pump. I measured superheat at the outdoor unit and subcooling at the outdoor unit.
SP=82
DP=255
SL temp=65
LL temp=110
Still not completely happy with the results.
Took another look today and sure enough it had a txv on the evaporator. I added a small amount of refrigerant to try and get to 10 degrees subcooling. Getting about a 15 degree split out of the...
It could be a piston. I could not get the cover off completely and saw the tubes going into the coils. The unit is a 2004 model so it probably is a piston.
I measured the indoor temps at the return grill. I was hoping I was not going to hear weak compressor :gah:
Cap tube system with 73.5 return and 64 supply. It is an r-22 system.
10 degrees
Got a 4 ton unit that is acting up on me. Below are my numbers:
Outdoor DB=92
Suction Pressure=82
Discharge pressure 235
Liquid line temp=110
Suction line temp=68
Indoor DB=73.5
ID WB=64...
Thanks guys. Target superheat on the HG3 was supposed to be 16 degrees so I was pretty close. I am going to go back and check the numbers today but the house is just very muggy on the inside with the...
I was thinking it looked pretty good but the RH is still pretty high. Guess I will have to check the ductwork or for outside air infiltration.
Guys just worked on a Heil unit fixed orifice that was not cooling correctly. I am typically large industrial ammonia systems so I am double checking myself on this one. Took my HG3 Fieldpiece...
It is condensate. When you open the door from the offices the cool air escapes causing it to become damp in the ambient room. It is in Louisiana where it is always hot and muggy. Was just looking for...