Search:

Manual states 3/4 water inlet and outlet . House has 1/2 water lines. Has anybody ran into this and/or any issues with just adapting to 3/4 at water heater ?

two hoshizaki ice machines i worked on this week were running 190 headmasters 404a

we do commercial only. refer a/c and heat . we've always had work , never been sent home for the lack of work. the refrigeration will keep you busy when the weather is mild and no heat or a/c calls...

x2 what mike19 said we also charge a vacuum fee

we don't individually charge for small screws or wire nuts, connectors ... but my boss does add a misc charge and its more than 3$ i can tell you that.

never mind ...figured it out . control was junk out of the box...

I just installed one of these controls on a cooler. Everything is working but I can't get into the programming menu. The manual says hold "set" for 5 seconds - nothing happens. Second menu of these...

head pressure way high... what was the ambient temp? did you look at the coils? shine a flashlight through them?

just checked out the service manual, looks like is has a curtain switch for bin level. similar to manitowoc.

my recovery unit was leaking liquid out of the bottom last time i tried to use it, took it apart and couldn't really see where it was coming from. anyone ever send theirs in to get rebuilt. just...

i don't think i agree with this. it holds 180 psi or whatever , depending on the flavor, during on a pump down . wouldn't matter if its liquid or gas...

yea I'm over thinking it...lol. the best way to diagnose the valve is when the system is charged up and running, so I'm trying to figure out how to do it with just nitrogen. but seems to me, you...

compressor valves could be leaking by. best way to test your valve unenergized put nitrogen into high side only with gauges hooked up on low and high. watch to see if pressure holds steady on both...

maine...nuff said lol.. i wear thermal base layers and then layer up depending on the day . you can always shed a layer or add one. i have all kinds of coats and gloves in the van 24/365. may end up...

headlamp, 11 in 1, multimeter, jumpers, iPhone (for researching manuals/schematics ect)

but in all reality every tool has its purpose and at some point or another i could not live without any...

we all had to sign a no compete agreement when we were hired. basically states that if we leave the company we can't pursue any of the company's accounts for 3 years within 150 miles of the...

definitely enough,
I've cut through 7/8 and 1" shafts with my 18v ryobi

28ft on our trucks ..

I Think your instructor might have meant gas system? Not refrigeration

yea I'm trying to remember now..... if other freezers I've worked on were trapped ...ALOT of them drain to the outdoors...

its a single throw double pole switch. common to fan should read closed with a cold coil, in your case 20*. if the spot on the coil reaches 55 degrees during defrost the switch closes red to brown...

never thought of getting rid of it all together.. that may be my best option

have a freezer that has its drain trapped inside the box. i know it is not supposed to be but been this way since installation. its 3/4 copper wrapped real well with heat tape and insulated, seems to...

Maine, its actually only like an hour drive from my house but i just don't have time to check it out..

that pump comes like that, i have the same one. i always used it for tying off and roping up the roof, i assumed thats what it there for...

i agree with the second opinion, I'm going to talk with her this weekend and tell her to do that.

they said a crack... thanks for the reply. i dont live nearby or i would go check it myself but its an old boiler so a crack would not be out of the question..

filter puller . try google i just found one not like your describing, its the same idea as a tape measure though

pretty sure they do, but I've always used a tape measure..

I have a family member who had a tech out recently and found her boiler had a crack in it. not sure of where the crack is on the boiler exactly. they want to sell her a new boiler and she reached out...

do you work for trane?

i don't make much more than that now... maybe I'm getting hosed but i don't have 5 years field experience yet

we have an incredibly hard time finding techs. either their established at a company and not willing to leave or they come out of school and don't have the drive to really want to be better techs. a...

everywhere around here..

thank you !

m- ycd150c3h0ca
s- R37100736D

thank you for the response greatly appreciate it!!

Rundawg, are you out there? I desperately need a schematic for this unit. i have full model and serial if needed. every one i find online does not include a set of contacts that i know are in this...

there is a hotel we service and the entire place was piped in cpvc and it is a nightmare. every couple months a leak develops and whether it be in the mechanical room or in the middle of the hallways...

was this a new install?

depends if there any solenoids is the refrigeration circuit really. but once recovered i would definitely add a port for the other side of the system . that way when all repaired you can determine if...

x2

i use this one every time on cap tube systems

fans are supposed to cycle off with a defrost. is this a restaurant of some sort? is there any type of dish equipment in front of the door?

Seen this exact thing before , roofers blamed a/c as well. Actually have a thread on here from a couple years back

I've used toggle bolts a couple times as well. have had a couple change outs where i couldn't get to the top of the box...

must have been a b tank..

the two times i found a start cap "blown up", (first one read OL on meter) (second one blew all the oil out). it has resulted in replacing a compressor very near in the future. the first one ran for...

does this unit have an economizer?

never seen those before

today is monday lol