Search:

I've had to use it before at another company. I have used it with limited success when the leak was very minor, however plan on returning to recheck the system about a month later. If the system...

Thank you for the encouragement. I have only owned a buisness for 2 1/2 years, I try to be VERY thorough when it comes to bidding on commercial jobs. I always run the load calcs despite what is...

Sorry for the typing errors, I'm posting from my phone...

Architects are the worst!! I am having an issue with an architect right now due to a poor design on his part. I found the flaw when I bid the job, advised him of the problem and his response was...

At 40psig, with r22, gives a 17°f sat. temperature. You say you have 2.8°f sh, thats a 19°f suction line temp. You are not boiling off the refrigerant in the evap coil, but definately in the...

With the current price of R-22, there has been a influx of MO-99 and R-422b in my market. I have heard some good and bad things about both of them. Its anyone using these products and if so what are...

didnt mean air, but gas in general. in a vacuum electrical resistance between an open span decreases Incredibly.For example At a 120 psig with R-22 gas, span resistance would be something like 550...

John, I look up to you. I will try to have the same attitude that you have, you seem to be very thoughtful of others and I hope that you show me the mercy as you have pony when I stumble in the...

Agreed. BUT, look at his previous threads? That CANT be a PRO! You, timebuilder, and other pros, SURE but this!?

Or "That broken garden rake was my Great Great Grandfathers from Ireland!" Swear to God that happened to me about two years ago. Other than blazing saddles, he was the first black irishman named...

Just looked at his threads that he started, very interesting...

I hate to be ugly to the guy if he needs help, HOWEVER what I said about protecting the trade is very important to me. As KB COOL said about paying his dues, that is where you get your tech skills...

air itself is an insulator, in a vacuum the lack of air GREATLY decreases the electrical resistance between the windings making it more likely to arc out.

That is EXACTLY what I was trying to say, sorry tech it out. long day...:cheers:

section 406 in the ICC is all bout testing and purging gas piping, types of testing gasses, pressures, time tables, etc..

According to the ICC 406.4.1 "the test pressure to be used shall not be less than 1 1/2 time the proposed maximum working pressure, but not less than 3 psig." and continues later on to say that less...

I understand that and I DO kinda feel like an a** for being so critical, BUT it seems like he has his own repair business and has NO idea of what hes doing...

HELL, I think the first edition would be helpful in this situation!:bump:

I understand what you are saying, my comment was stating that if the control circuit is not energizing the relay it WILL read open, you need the power on for the control voltage to check if the relay...

to AC5096: thats the best thing for this situation!

how long will it be before we see chris mathews interviewing pony on a hidden camera show? Customer in the background saying "I paid him all this money and he put in a USED unit!?!?" There is a...

What it comes down to is WE HVAC/R techs have a reputation to protect. It has been slandered and twisted by some "techs" to the point of public distrust for our entire industry. Those that represent...

yup. thats the only way to check the control circuit

actually there is a ceramic post that sits on top of the bi-metal disc, when the disc is heated it "clicks" changing shape from converse to convex pushing the ceramic post up and closing the circuit....

:cheers:

1) I hope that unit came from the SAME owners property or it is ILLEGAL!!! Section 608 sound familiar?
2) Your grammar is that least of your problems, your customer service and technical ability...

There is nothing that i hate more than going to a supply house in a distant land! I have a contractors licence for the ENTIRE state of GA, I do a fair amount of commercial work out of my local...

This was the ticket! 8" diameter and just over 1/4" thick. In shower with hot water letting it soak in trying to break it up. Lost a little hair (due to impatient wife "trying to help) but got it all...

I have spent the last 65 hours strait installing a complete system from ductwork to control etc. I insist on using mastic on all metal seams and insulation seems, with all the ductwork, controls,...

I apologize for being so rash. I respect your views understand your concerns. Even as we may disagree, I am thankful that we have the freedom to do so.

This isn't a health care debate at all! There is no concern of the sick or less fortunate, this is a class welfare debate! What the REAL concern here is you HATE prosperity! I am no longer going to...

I understand the aggravation of an old chase. If its a single story, go up the wall into soffit, if you must reuse the chase I have soldered new copper onto existing and pulled them through with my...

Ditto. I am going to continue to work hard, save my money and support the candidates that will ensure your agenda of enslaving the populace never becomes a reality.:ditto:

Going with this logic HVAC should be regulated, I hear horror stories about customers getting "Victimized" by some evil A/C company? Same with Plumbers, Auto repair shops etc.. should the Government...

I really can't offer any info until I understand what it is that you are trying to solve.

Based on you're original question, if a light bulb of 100w of heat is added to a conditioned space, it...

BoatMechanicMatt Yahoo answers had this question on it. The answer was

Quote:
A 100-Watt light bulb provides 341.2 BTU of energy (light & heat) during 1-hour of operation.

Than what is the...

I am going to make a honest attemp to send you some new like minded neighbors.

If Canada has such a fantastic health care system, why arent are those not so wealthy americans seeking canadian citizenship?

I am sorry if this sounds ignorant but i was curious if this would be a possible solution?

If so many people want the government to assume responsibiliy for their healthcare needs, But at the...

What the problem comes down to is cost of medical services, and you ability to pay for them. Why is the "cost"of medical help so high? Because of added regulation by the government, creating...

If only ALL government employees were trianed by drill instructors...

seems to be the ONLY sector of effinciency and accountability...

I am sure the government has the well being of its citizens in mind. They surely dont have an agenda. Especially one that touches EVERYONE!, im sure they have good intentions and will be ass...

The reason the government never had to house t he elderly in the past, was due to wide spread charity. their children would take care of them in there later days. these days the children just throw...

I did glance at the link that was placed on your prior post in efforts to get some kind of info about were you were coming from. I could only take a few minutes of this propoganda. i have a few...

Texas-Tech, I just have to make a slight adjustment to your post, it should rea

All we have to do is use the resources we already have to cut our dependence on foreign oil, and cut our dependants...

It sure seems to me that every type of alt. energy that the feds are dumping OUR money into are dismal failures at best. But, the real problem remains,
WHEN DID THE FEDERAL GOVERNMENT GET / ASSUME...

Just curious? what part of the country are you in?

here in south GA we are having a messed up heating season! will get down to mid 30's at night, low to mis 50's during the day. but the cool temps...

[QUOTE=mbhydro;12504261]Come here to Winnipeg, to save money only half of the intersection cameras are being used at any one time by the police. The strobes still fire off but no picture is taken. ...

[QUOTE=Tech it out;12500981]I have to talk to an accountant. I dont have a clue about business which is what I'm hoping to gain here as I get started. I guess I figured I'm not hiring any employees...

Just curious why you chose sole proprietorship over others?