Search:

Thanks to everyone for replying. After taking a better look, it was a small pilot flame. I should have seen that the first time, but the pilot is in the back under the logs, a quick peek under the...

I have a Heatilator GNRC36 that won't light when wall switch is flipped.
The static millivolts are 337, flip the switch and they drop to 186. Tap the valve with back of screwdriver and the valve...

I have customer with a Peterson logset G46-01 burner. it has electronic ignition. It has a box that contains the ignition control module and the battreries, this box sits on the hearth in front of...

Call Specialty Supply 800-331-9234 they are a Lennox parts distributor

Hearthman, most local building inspectors want two layers of 5/8" on walls seperating garage from living space, some inspectors will let you put one layer on garage side and one layer on house side

Done all the time. frame bump out in garage deep enough for the fireplace you select, run manufactuers listed pipe as per manufactures directions paying strict attention to lenght of pipe run, number...

I think eyeseeitall ment 20 btu per cubic foot

Yes vent free does vent somewhere, it vents into you living space. Direct Vent is the only way to go where possible

I beleive Marco was bought by Superior which was bought by Lennox. Take a look at this web link- http://www.marcofireplace.net/

It is 25 deg. outside.
What is CPH (cycles per hour ?)

I have a Ruud 90k btu. 90% gas hot air furnace in a 2400sqft house.
When it is just maintaining temp it cycles on 10 min off 10 min on 10 min.
Shouln't it be running for longer periods? If I bump...

Is this a regular masonary fireplace with a chimney, or is it a metal factory built fireplace?

You asked for a link and was given one. They do make remote wall switchs for millivolt controlled fireplaces. Some are handheld remotes that come with a holster to hang on the wall, so you can use it...

Go to-http://www.lennox.com/ and click on find a dealer, or go to any local fireplace shop.

It,s like a chattering noise, almost like the sound of a stripped gear, I know it does,nt have any gears. but thats what it sounds like. The flame is fine. Could it be the ignition module?

Older FMI unit with IPI, When you turn on the wall switch and send 110v to the transformer there is a 10 second delay until igniter starts sparking and gas valve starts making a lot of noise pilot...

Superior is part of Lennox http://www.lennoxhearthproducts.com/

heatkits-
it was the fireplace glass, I didn't do anything to it, and I don't think it was my fault. I still told the lady I would get her a new glass for cost. All I did was take it off and put it...

Put a thermocouple in a Heat n Glo 6000, put it back together, fired it up, homeowner was so happy her fireplace was working again, gathered up my stuff and took it out to the truck and made her out...

I live in Pa. My ducts run across my unfinished basement ceiling, they are always bone dry. Unless my son goes down there to hang out with his buddies and they open a window,if they forget to close...

Is it ok to use a infrared thermometer to check super heat ?
If no why not?

IS IT NECESSARY TO HAVE A CHIMNEY INSP. IF YOU ARE INSTALLING VENT FREE LOGS IN A MASONARY FIREPLACE. EVEN IF YOU ARE NOT USING THE CHIMNEY