Search:

test[img:orange/11.gif][img:orange/15.gif]

Cut a piece of rubber hose , about the same size of the drain, wrapped arount it with a stainless steel hose clamp.

I think it had some kind of Master/Slave, old style with four or five different kind of sensors on and i 've seen it on some med/low temp cases

What is the most common problems you, re run into?...

Thank you for the quick responses.

We also had 15 stores with Danfoss-55 all used the same 12345-50 and did agreed with Soda.., they are the most friendly and easy to use for some new learner like...

How can you get a temporary Id and Password access, just want to test the defrost function.

This is the first trip to the new account.

Was on call on Thank giving holiday, had a call early Friday 5:00 am though I could stop by Best Buy to check out some Holiday Sale.

Unbelieveable long fricking line of peoples camping out infront...

In the past I had own Sony, Misubissi rear projection, their projection lamp seem to last only 3 or 4 years right after extended service is expired, you' re all known they are not cheap to repair.
...

My vote would be a toss up between Ice-O-Matic Under counter, and the venerable whirlpool/maytag slab monster
__________________
Remember the lowest bid isn't always the best deal

I hated all...

I had seen alot of Flakers is working great with low temp rack circuits, but never seen one cuber like Manitowoc toghether. Why ???....

Thank for all responses,

I just picked up 2 dozens of Cuno cfs9112s water filters today and start preventive maintenance on over 20 stores, all are Scotsman Flakers, my less favor brand,

Inside...

How many brand out there having mounting head compatible with them? how good are they?

My Scotsman dealer sell some CUNO/everpure subsituded, the price did cost less those aluminum catrides.

Any of you guys ever work in Subway?

Take a quick look at any make ice maker after 6 months


I knew what're talking about, every Subway refrigeration works are PITA to work on, Just do not get...

glad to hear you're ok Spike, as least you still can go home an see what your home is looked like.

I lived in New Orleans and in the same situation as you are, my home was flood with 8 fts of...

It droped several times I figured it wont happen while Im
standing there. Then after the last one dropped it went back to frezze mode. several seconds after the pump started

The compressor...

I am talking about a big portable CO2 tank without a safety chain tie around it.

What happen if it is got knock down on the ground and the the brass hand valve is accidentally busted off?

What...

Thank you for all the advises.

I did not think about the dumpvalve, cause it's only happen on right side coil, I will pay attention on next try.

Two week ago, I did call manitowoc tech support...

[QUOTE]Originally posted by dorrmann
[B]My first thought is to make the bridge thicker. The cubes should come off in one single slab instead of individually. That should solve your problem.

I...

This ice machine had no trouble with making or release ice on time. There is no trouble code at all.

The only small aggravated thing it did was once in a while there will be one or two cube of...

HI Lynm

Just change the compressor relay, Traulsen reachin had alot of troubles with its compressor relay, its either stucked closed on freezing mode freezing up evapcoil, or intermittent like...

Anyone here doing work for Exxon/Mobile provider?

What do you think about they used this controller to monitor all the store roof top a/c, wi cooler, island cases temperature?

I agree with you about r502 are lowtemp all the time.

I also had some of the Old Delfield customade preptables with the freezer on top, med temp on the bottom to hold all the salad dresses and...

Most of the reachin that old with r 502 probably had leak in the evap coil caused by acid from salad dresses, pickles after all these years.

If you can find the leaks and fix it, convert to r 408,...

What!s about all other techs who had to carry your loads for you? how do they feel?

Ice maker lost all the charges( 20 lbs of r-404a) at leaky kingvalve, oil was dripped out of it, is there someone had work on it before me? how long? I don!t know.

Last call of the day so I just...

I have seen some new installed did maintained 40 f.
also some of the old one with so much gunks, and trashs builded up inside the evapcoil, compressor ran 24 hr/day and can barely make 50 to 60 f.
...