Search:

no you posted a product information data sheet that is not an installation guide. Look up long line applications if it isn't in your instal guide you should be able to get it from trane

I suggest you go with the one you trust the most and has a good reputation. As long as that guy aint the one who wanted to put in a 2.5 ton or couldn't tell what size the air handler was its right...

you should try reading an installtion guide sometime if you cant do that try hooked on phonics. Long line application start at 60 ft. The difference in charge is not pounds but ounces per additional...

Usually if you have a problem and you have to call a service tech then the bill is subtracted from your rent. This can cause alot of arguing depending on your landlord or it could be no problem I...

You need maintenance. your talking about 30 or so degree temp difference this happens when you don't have enough air flow. You probably need a good coil cleaning blower wheel cleaning and filter...

Rheem 16 seer throw in a thermostat and a 1 year maintenance agreement

Unless you have copper pipes 60 feet in length or more you shouldn't need to add refrigerant. In addition the amount you will add is quite small ounces not pounds. knowing boca I doubt you have 60...

to allow the water to drain with out it air flowing in the drain line can cause the water to not flow

change the lines.

so your going to have eight different airhandlers to maintain and fix by techs that have no idea how to work with these things. I say yeah go for it whats the worst that could happen

honeywell 8000 touchscreen

They don't want the truth they want you to tell them what they want to hear. She'll just call someone else until she gets what she wants

yeah both your thoughts will help with out seeing the house i can only answere theoreticly.

This is something you should concern your self with. No it's not a good practice to run r410a through a r22 coil. This hot shot 22 is not approved to operate in any manufactures equipment that i...

Theres nothing wrong with ruud the only thing i hate is the installers like to leave the little foam thing they call a filter. I would have my guy include a media filter that mounts to the...

why are you using a humidistat. There are hundreds of new thermostats that also control humidity all in one. I had trouble following what you were saying but it sounds right I believe what your...

when meeting with the service guys the one that tells you no he's the guy you want the one's that tell you yes we can do that don't hire them.

as a tech we prefer you use the fiberglass filters so we can fix your equipment more often. It's profitable for us. However if you want to protect your investment then use the pleated filters. If you...

It's not going to kill it your fine however the guy that said what happens when the next guy changes it is right however I would really worry about you if your changing the same cap that often.

Just do the 80% furnace. It will be more efficent then what you have with none of the problems. I would also consider doing a heat pump if you aren't already going that rought. The difference between...

if their hvac is anything like the lg phone i used to have then I would say lg however i know mitzu is very good stuff so I'm going to vote mitzu

1.)do not jump or disconnect anything.

I'm assuming by what bald loonie said thats an infinity furnace. The reason he would suggest this is because It gives you the capabilities to operate your...

If the duct is to big I would tell you to go with the variable speed. Plus it gives more comfort. On the other hand you've always had single speed so it's not like your loosing anything. Variable...

I think it was beenthere who does those figures all the time in my area im lucky to get to play with a gas furnace so we don't spend much time doin figures like that. see if you cant track him down...

Somethings not right with what you said when that thing goes into defrost you should be heating in gas. I believe with out making a phone call the furnace you mentioned has a heat rise somewhere...