Type: Posts; User: bcgnet
us big dudes always get stuck moving the heavy stuff around...
i've run into wrong nameplate charge a couple times and have been told by the factory that it's actually quite common...guess we have to pay attention out there!
Please tell me you calibrated the kaniddly pins before dumping more gas in....if you didn't, you may be screwed. you will need a 5 gallon bucket of steam to calibrate those.
beat me to it...damn roofers
do i smell another dirty truck contest??
thats good practice. if you're spending the money to their the whole thing down, might as well replace the pump and motor. avoids egg on your face if it fails soon after the work is done.
randy, where abouts was this? i'm also from western ma.
i've had chattering hi pres switch before, also had stake on connection on aux circuit breaker contacts just resting on it. sometimes it made, sometimes it didn't. threw me for a loop for a little...
the parts consolidation is a **** show...
put a trane purifier on there... those shaft seals suck especially if you're down for a while (like all winter) i'm in the middle of installing two right now.
trane uses ceramic bearings and brush kits on their vfd centrifugals
yes i have seen this a few times... i have heard if the split is on the side of the support bracket it was from vibration... if it was on the "lifting" lug at the middle of head of the compressor i...
The oil line amp draw is true... i've done it. i never heard of it being an early sign of bearing failure though...
i beleive if you update your ch530 service pak to version 10 you should beable to set starts and run hours. i think its a new perk with the latest version
8 years with Trane, central and western massachusetts, a couple years residential before that.
i do whatever gets me home safe. they don't pay me enough to die. if its not safe i'm not doing it, i could care less if the numbers come in.
i have done many penn 66 upgrades on these units. works great.
i see the problem, condenser's dirty!
there is a fine line between balls and out right stupidity