Search:

IF you are talking a centrifugal chiller there is a company that will come in with a big tanker truck with pumps ...... flood the machine with liquid ref and pump/filter/clean.

what you said here is interesting and I never really thought of it .....your statement compressor discharge temp equals i assume sat evap ref temp plus sat cond ref temp

so i pulled a couple of...

You could send a sample to the chem lab in Charlotte ....they may be able to identify it for you.

I am not sure what your issues are....but I would be most concerned in getting it out of an inverted start condition and getting lift on the machine as quickly as possible....depending on vintage of...

There is a current limit that can be set remotely.....either com bus or hardwired with a module....i think that module also does remote water temp set point.

there is also min and max capacity for...

Why would you replace the best purge ever made (Purifer) with the POS Earthwise?

I can not tell from his post.

But our water heaters work pretty good.....I just got a 800 ton machine r123 up to 7 psi in about 5 hours....with condenser drained.

That is if you have to use...

I am assuming you check the pumpout compressor by taking the line loose that goes to the vent line.

I have seen those carbon canisters get stopped up.....in my experience that is pretty rare...

If the machine has air or the recovered charge you put back in has air it may take a few days to work its way out.

I would override for 72 hours

I would check the pumpout compressor as Graham...

Well that is quite a bit of information.

Does the machine have air in it?

Have you checked to see if the exhaust line from the pumpout compressor going into the vent line is actually pumping...

And really most of the time if the sleeve brg is torn up....babbit all smeared around ….if the shaft is not cut the clearance is less that spec.

Last month I bent my jack out rods and broke the...

What may I ask is the tin and iron levels from the oil analysis

I follow how to check thrust ….I was interested in particularly how you exerted this pressure.

Again we check it on the shaft directly adjacent to the sleeve brg once the compressor is...

they did not …..that is current

The nominal clearance for the sleeve brg is 0.005 to 0.007.....most of them come at the min clearance....that clearance is in the cv service guide

Obviously that is the reading between shaft OD...

Ice bath

If you are talking about a Trane Purifier or later....make sure the sensor is seated in the well on the suction line ….use heat transfer paste ….and use a wire tie to ensure ice does not...

You are correct Sir.....it will be very costly

Approximately where are you located …..possibly someone from this site may be interested in working with your company

The industry as a whole is...

I have seen contractors do that before.

I assume you will be going back to replace the 2133.....since you said temporary fix

Not sure I want to assume the liability of turning the machine...

If possible I would give my friend Pat with Provibe a call ….they are located in Wisconsin USA.....your rotor bar idea sounds pretty good....especially if it is a medium voltage machine....

He...

I know it is a lot of trouble ….but my main concern would be the vanes locking up if it has been sitting around at atmosphere and possible moisture.... most likely time for a vane rebuild...

That miscount may be the end of all of us

Similar to our last exchange where the guy just wanted to know how to trim a charge ……...they are asking what time it is and you want to tell them how to build a watch.

So since you have 80% more...

The defects that I referred to were …..when the machine was manufactured

Are you suggesting that the machine should have had a brg inspection before it was started initially

Since he did not...

LOL

I wish.....but with Biden in there and gas $5 a gallon I guess I can never retire.

I have to many expensive habits.

Just sunk 14 K into a prostreet motorcycle drive train.....Ive gotta...

I have come to expect these sort of exchanges with our resident genius …...but I assumed you lived in the real world and know how to make a profit.

We obviously have a different interpretation of...

Ok …..you are a genius
Bahahahahaha

Well if a person does not specialize then he is not a specialist …..obviously

I am sorry that you could not keep a job

I have worked for Trane for 42 yrs

But back to trying to help this guy...

Well I get paid to help contractors with Trane machines......do you

See it as you may

But if he works for AC Corp there is a chance I can go help him.....how about you

Here we go again ….haven't we already had this conversation about who is the oldest and who has the biggest.....

Then may be you should stick to nuclear turbines

Im sure they have a forum you can copy and paste to.

OMG......WTF is your problem....go back to the lab

I have replaced more sleeve brgs than you have ever seen.

You pin head types get on my nerves if you cant tell

Stick to McQuay that you...

Good afternoon....if I am not mistake you must work for AC Corp …..I know your company well for many years

First you did not say who is doing your oil analysis....but you may want to revisit your...

Healey I think you ran him off....lol

I really wanted to know what gas was in this machine....for obvious reasons we will not discuss here.

Yes the bulletin on the retrofit only applied to 514...

That would make a difference to me.....that is about the time 514 came on the scene ….I have a 2017 torn down now with 514

If it is 514 there is a retrofit for the oil/ref pump shaft

I also...

What ref is in the machine?

IT is like chillrdude said....adding to your problems is that I assume you will not be able to see the existing settings if the CLD is bad...so you would have to get the manual.

You need to be...

1233zd...…..LOL

I would agree with that ….short of a motor being rewound or it there is an obvious visual signs of insulation issues ….we don't just send them out to be dipped and baked.

We do on occasion send...

Got it

Excel is a good bunch....Cecil....the guy that started the company ran the Trane motor repair shop for years.

Well of course you can do what you want but I am not sure the what the advantage is in you sending it to some random motor shop and not sending it to Trane. With the Rnewal program you will get an...

If I may interject....why would you not sent the motor to Trane to have the work done..... They will put the brgs. in for you and test run the motor.

If you have it done by a Trane office as a...

Maybe remanworld is headed in this direction.

Is this a remanufactured compressor and does it have oil driven unloading of the cylinders

You may have unloader issues ….it doesn't sound like it...

I am defiantly not a York man.....but it seems like every York that I have had anything to do with as far as cond tubes go.....they all have small tubes and about one tube per ton

Maybe someone...

I believe for Trane it is in Webcats….Im sure the tube size and type are...pretty sure the count is as well.

Now that's funny....lol

The allusive trane superheat device....to bad I don't know how to rotate the pic on here

821035

That is just the one I grabbed first....they are basically all the same....my point is that it is basically at the point of saturation.....hence the eliminators.

We were getting all kind of things...

Well yall just keep charging the Trane Centravacs with suction superheat

I would refer you to CVHE SVX02N-EN page 70......no mention of superheat in the chiller control or ref cycle

There is...

Just so I understand......are you saying in a CVHF that the liquid ref is subcooled.....and are you saying that the gas is superheated coming out of the cooler.

Well if you are you are incorrect...