Search:

Had to build one with a count sequence.

I need to rotate the start of 3 boilers. Is there a rotation block or a function of a sequencer block I am overlooking it the LX-GPI toolbox? Or do I have to build up a custom block to accomplish?

Honeywell Zone Pro set up as Limited cooling. Damper of course would be fans. Single output, would need sequencer for multiple outputs.

To use the outdoor air for cooling whenever possible.
The...

Thanks for the input guys, it confirms why my eye began twitching and the tightness in my chest after the meeting.

Thanks guys for your input so far. The 10,000 foot view is a different way of starting. In the past, the training and mentoring I have been involved in always started at the bottom with install...

Today I was given the task of trainning someone to do the “software” side of my job. The timeframe one year. I currently work with Tridium Branded “X” and Lon based controllers. I also have sites...

It is confirmed as standard. Thanks again all!

Thanks for the input guys. I think I have found what my issue maybe in another post. Looks like there is an Open and Standard version of the IVU.
...

I have integrated an existing Ivu into a new Jace I just installed, Bacnet/IP. The Ivu has Carrier Comfort controllers on it. The programmable long stick types, not sure what they are called. Most...

What do you have for your dns server address? I had this same issue. As the man with worms stated, note number two solved it for me.

If when you say "integrate" you mean add devices to the existing trunk, as was said, you should not have a problem discovering those new devices. If by "integrate" you mean bring devices under...

Pulled from a project in Sept. In working order. Email if interested.

Thanks.

I used this one getting started -

Electrical Theory and Control Systems in Heating and Air-Conditioning Technology
Martin Greenwald

For Sale, make an offer if interested.

(2) - BMTS
Date code 4/1/98

Tracer 100I
Date Code 9/24/96

(3) - Carrier
CEPL130201-01

Maintenance tech is probably your best bet at a hospital or a property management company. In my experience, depending on the place, those guys usually get to pick what they want to do and they sub...

Anyone ever heard of, ran into, or dealt with this company? Thanks.

Works, Thanks!

On a newly installed system, Ver12, boxes com4, is there a way share a zone sensor through hardware or software? Thanks.

What are the benefits of this module?

I agree with tlp261, a small ddc controller is the best way to go. To answer your question, there is the Bard MC3000 Series Master Controller. We have a customer with data sites that uses this...

I had the same thing a few years back with the first 201 I installed. It was a Lon job with just too many controllers for the Jace. I believe an upgraded license to expanded memory was the fix.

I have two LX RTU controllers that were install at the same time about a year ago. I had to go back to the site and noticed something I can’t figure out. Both were bought at the same time and are...

Amen to the first day on the job section. Anyone truly interested in the trades needs to really understand this and do this. It will take a greenhorn further than their pride will.

I did something very close to the same thing back in December. I did not want to horse around, I bit the bullet and picked up an FX-201 and a dual RS-485 card. I have an FX-403 from 2007 if you are...

Thanks for all the input.

I did turn off the second network port to null out the subnet conflict. It still will not connect correctly through serial shell. After failing to connect through the...