Search:

Have you considered Georgia? Or trying to get into industrial chiller work? I would be interested in speaking with you if so.

Nit pick much? Good lord

Yes sir, email me and ill shoot you my cell#.
BTW its a "zero" Not an O in H20 for my email.

I will get you all the chiller work you want here in north Georgia! Our office is out of Atlanta, come on down and we will make it happen.

Is the noise very loud in the oil separator? What tonnage are these machines? Are there 2 compressors per circuit? If so are there solenoid valves installed on the 3/8 oil return line from the bottom...

You are the man

Sent from my SM-G950U using Tapatalk

So these Very old units are how old exactly, what's your s#. I dont really think Trane failed at all, i think they built a unit that exceeded its life expectancy to the point it may not be worth...

Does the chiller have control of the pump, flow proving working properly? What were the eddy current results, what caused the failure?

Sent from my SM-G950U using Tapatalk

As of about 8 months ago trane mini splits are being made my mitsubishi.

Sent from my SM-G950U using Tapatalk

Oh yea... almost forgot! I am a Trane technician and I approve this message!

Sent from my SM-G950U using Tapatalk

Screw it, (X4). Definatly O ring boss fitting.

Sent from my SM-G950U using Tapatalk

Yep, that one lol!

Sent from my SM-G950U using Tapatalk

Thanks for getting that song stuck in my head!

Sent from my SM-G950U using Tapatalk

You have to prove X% of current within X% amount of time or you will see a phase loss. If you disable phase reversal it increases that amount of time to prove current with the soft starter. I ran...

They are still making them!https://images.platforum.cloud/uploads/20181031/5e4c8379c282305756e131178cc5d956.jpg

Sent from my SM-G950U using Tapatalk

I'm taking bets that the next video shows them brushing tubes with a rifle cleaning kit.

Sent from my SM-G950U using Tapatalk

Have you disabled the contactor integrity test. However if its programmed for a sss it shouldn't look for this.

Sent from my SM-G950U using Tapatalk

Is this a upc2?

Sent from my SM-G950U using Tapatalk

What is your question?

Sent from my SM-G950U using Tapatalk

Trane supply is ran as another company than trane service. I know our trane supply guys would rather sell the parts to a contractor than to us because they actually make money that way. They get...

And the point of your comment was?

Sent from my SM-G950U using Tapatalk

Thanks, i got it taken care of.

Sent from my SM-G950U using Tapatalk

Ive got a m# IACXI-185T-6Q with am MCS magnum panel that I need the password to reset diagnostics. It's stating that the daily reset has been exceeded. By chance do any of you guys have this info?
...

And here it is! With a fancy snap ring next to it, to our knowledge the last time this machine was opened up was...

Is your wiring in tact and all connections tight?

Sent from my SM-G950U using Tapatalk

We dont have many. I have one that i service once in awhile for a big walk in blast cooler.

Sent from my SM-G950U using Tapatalk

Lol. If you make changes and run the water first, that should straighten up. If the fans can not keep up its just dumping water on discharge refrigerant temperature and causing your issues

Sent...

"Evaporative condenser" dont know why i said cooler

Sent from my SM-G950U using Tapatalk

If its an evaporative cooler the water needs to come on first, fans second. If vice versa the the heat exchanger is at a higher temp which can vaporize the water and leave mineral deposits behind. ...

Is it a true closed loop cooling tower and not an evaporative cooler? No refrigerant in the tower?

Sent from my SM-G950U using Tapatalk

Got it. Thanks

Sent from my SM-G950U using Tapatalk

Well Dad, it got me again.

That too. Between the English and the comment he must be from North Korea. I'm just gussing

Sent from my SM-G950U using Tapatalk

......somebody needs a snickers

Sent from my SM-G950U using Tapatalk

Lol. I know the exact noise you speak of and I am familiar with the look of confusion as well! [emoji16]

Sent from my SM-G950U using Tapatalk

You can run the boiler water through the vessels and come out of the condenser into a floor drain. Some customers dont like doing that due to loosing their water and chemicals.

Sent from my...

When the machine is running your condenser is most likely in a positive pressure, pushing refrigerant out. When its off the condenser is in a negative pressure and will suck air in. Some machines i...

Jayguy made a good point, if you continue to open your hose the liquid should dissipate quickly and be just vapor. The machine may not have a condenser pressure transducer, if so your evap and...

Are you sure its refrigerant?

Sent from my SM-G950U using Tapatalk

In the center directly under the compressor, or under motor/behind the starter cabinet? Regardless you should not have any liquid refrigerant there. What were the symptoms of the machine when...

Liquid refrigerant coming out of the top of the evaporator?? What valve are you referring to?

Sent from my SM-G950U using Tapatalk

Being a 2008 chiller im assuming you have the refrigerant/oil pump mounted below the condenser? Was the pump, motor and stator removed/replaced? If so you can get it in a bind if you dont tighten the...

Lol, i figured that's what was going on!

Sent from my SM-G950U using Tapatalk

Residential, commercial, industrial?

Sent from my SM-G950U using Tapatalk

Your a good man, thank you sir.

Sent from my SM-G950U using Tapatalk

Well I've been demoted it seems.....
I had pro membership yesterday when i logged in, today pro membership is gone. Could I get some help with this please? Thanks in advance.

You live and learn, i have a feeling this will be one of those learning experiences. The Op sounds like my wife when she gets a ridiculous idea in her head and wont listen to sound advice.

Sent...

By reading his post, it seems to me that he may not be fluent in English. I could be wrong, but if so he may not be able to articulate his post the way we would like to see it. It's just needs a...

what is the reason for binding, did you unbind or install a new Exv? does it have a yellow face?

Sent from my SM-G950U using Tapatalk

Do you have the remote condenser Installed?

Sent from my SM-G950U using Tapatalk