Search:

Type: Posts; User: shankle

Search: Search took 0.00 seconds.

  1. Keep unused Basement heat registers opened or closed, does it matter?

    We don't use our finished basement much, does it make a difference to the air flow for the rest of the house if I keep the heat registers down there open or closed? I have them all closed now...
  2. - intake air feed = the one that connects to the...

    - intake air feed = the one that connects to the duct work coming down from the house (see photo)
    - the furnace is in a closet in the basement with the water heater (all exhaust going up through...
  3. Return air register putting out cold air ? Do I have my ducts wrong?

    I have an older house (built 1984) like crap, bad siding, many leaks. I have this one bad draft that I couldn't pin point until I realized it's cold air coming from out of the return air register...
  4. The exhaust pipe (combining both the furnace and...

    The exhaust pipe (combining both the furnace and hot water heater exhaust) run right behind one single layer of sheet rock from the basement up to the roof) nothing else around it, The stat is on the...
  5. Actually there is a toggle switch on the board in...

    Actually there is a toggle switch on the board in my Goodman that lets me set it to run as 2-stage (high heat) all the time, no delays, no single stage only, so I could just run it that way. I don't...
  6. Furnace is 80% Flu pipe and hot water heater...

    Furnace is 80%
    Flu pipe and hot water heater come together in this metal vent and right up the wall behind where the stat is mounted. The wire to the stat is literally running up ON this metal vent...
  7. Wire to thermostat is right on the Furnace exhaust pipe, ok ?

    The wire to my thermostat runs up along and ON the exhaust pipe of the furnace, could this be effecting the 'temperature sensor " in the thermostat, as we've noticed the stat takes quite a long time...
  8. The Goodman model is GMH80904BNA, is there a...

    The Goodman model is GMH80904BNA, is there a better stat I could be using with it instead of the current Honeywell Pro TH4110D

    thanks
  9. Do I have to rewire it to get/use a two stage...

    Do I have to rewire it to get/use a two stage stat ?

    what does this mean --->
    Also, I've seen where a system is short on return air, the new furnace will bump the limit.
    This (shortage) did not...
  10. The furnace (Goodman) states right on the inside...

    The furnace (Goodman) states right on the inside cover "this furnace is designed to be used with a single stage stat" despite furnace being two stage (as in the control for the stages resides on...
  11. How would all this explain why a/c works fine,...

    How would all this explain why a/c works fine, just not the heat?
    Is there a specific stat i could use to bypass this problem?
    Thanks !
  12. Single stage stat on a two staage furnace, can I do that ?

    I have a Honeywell Pro TH4110D single stage stat, running a Goodman two stage 80% furnace. Goodman said this is the acceptable way to connect it up /run it, any thoughts on doing this ?

    Seems...
  13. It's literally like the stat isn't "cooling off...

    It's literally like the stat isn't "cooling off fast enough" as the rest of the house, so we're always waiting for it to catch up so the heat will come on again
  14. Behind the sheet rock of where the thermostat is...

    Behind the sheet rock of where the thermostat is lies the furnace exhaust and heating duct to upper level (yes, pure genius these builders), however the sheet rock is sealed off and I insulated the...
  15. Sorry, I didn't mean freezing literally, I meant...

    Sorry, I didn't mean freezing literally, I meant really cold, like we're constantly 'waiting' for the stat to come back on and cycle heat again. How sensitive could the stat be to what's behind the...
  16. Thermostat doesn't come on until it's freezing in my house ?

    A year ago, we had a Goodman furnace installed and at the same time a new Honeywell Pro TH4110D stat. (furnace is two stage, stat is single stage - but goodman says this is correct set up, the board...
Results 1 to 16 of 16
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event