That maybe a fact. One tube had a bad lump of carbon, just on one little spot. Could this be an oil leak? Some of the outside burner openings are not entering the tubes. My research tells me the 35C+...
Type: Posts; User: waltc944
That maybe a fact. One tube had a bad lump of carbon, just on one little spot. Could this be an oil leak? Some of the outside burner openings are not entering the tubes. My research tells me the 35C+...
Come on anything. At this point I'll try just about anything. I don't want to charge this client for the time I have put in it. I DO want to KNOW how/why this is doing this. Help
I do believe this is an air gas mixture problem. Is there an adjustment on the 541006 valve that I am missing?
Yeah the gas pressure is good at 6"WC. The ball valve adjustment was to see if the regulator would make a difference. No name plate this fryer is OLD. The other Pitco 35C+ next to it says 6".
I'm...
The flames are strong and vary with pressure. The ball valve adjust to give more or less pressure. I opened and closed it to see if the volume of gas would make a difference.
Is the yellow flame...
waltc944
New Guest
Join Date: Jun 2011
Location: Freeport ,Fl.
Posts: 3
these dog gone yellow flames again.
Ok I have changed the nat gas valve to LP and the orifices are the correct...