Search:

We didn't install this one. They homeowner happens to be the guy I purchase my insurance from. He was dissatisfied with the installer (probably lack of training) and has had us out to do PMs on the...

A customer has an Infinity that sometimes gives a reading on the indoor controller of "Sens Error" and I don't know what that means. Is it the outdoor air temp sensor or the controller indoor sensor...

We put our first XV18 in last week and there is no doubt that is a very quiet system as is - w/o the weathergurard top. Will a 19.5 3 ton vs. an 18.0 3 ton system ever pay for the extra ~$1000? Not...

What are your thoughts on this stat?

We have been using them for about 2 years now and I am tired of the ticky-tack error codes that seem to come up. 126 is one (equipment missing???) but the...

I love zoning equipment. It's like having a light switch in every room or a faucet at every sink instead on one huge incomming power switch or water valve.

2 stage equipment and some sort of...

The side they put towards the wall is the side that needs room to swing open for cleaning; condensing unit photos. Not cool IMO. :beat:

Just kidding. Don't go suing me for slander etc. It would be something the Trane engineers would think of, something that no one as asked for but they would dump a ton of $ into design and testing.

Ok, Trane makes these units right now:

GAM5 - constant torque blower

TAM7 - variable speed blower

TAM8 - variable speed with communicating functions

Now here comes the new one.

There was a bloke from Australia in Schamburg this year! That is too far. :grin2:

I don't like customers purchasing or specifying what equipment I am going to install; that is my job.

X2.

:censored:

I thought the outdoor temp sensor was installed on the outdoor unit or is this something else

Mobile homes usually have the transformer outside for the rc terminal on the t-stat and the indoor transformer for the rh terminal; no jumper between them.

You knew that. You are just pulling our...

Me! :angel:

Remember, they are only allowed to make 45% of what was produced last year so how else can they make up 55% of their sales?

I think the suppliers to our suppliers are making all...

Check side-to-side and up and down play in the shaft. If there is play and the oil is leaking out, recommend the motor and show the customer what a new motor feels like.

It appears that I do not have access to the SZVM but rather the older WinZone (I already have that)

Hmmmmmmm.....Trane....controlling dealers.......not sharing product data in a timely and...

thanks.

You're the best....the very best. :grin2:

I have always called that an Inverted Hensley fitting.

jk, I don't know jack about sheet metal. :grin2:

It looks good. It's better to take too long and look good than live with some crappy...

I knew someone would point out the 3rd building sooner or later. :whistle:

comfortsite>login>password>.........where do I go from here?

RLA is irrelevant. It is at laboratory conditions.

Common is not a winding, but a terminal/wire that shares both run and start windings.

I have scanned all the literature that comes with the stat and I cannot find anywhere what to do with the data I retrieve from the SD card once I am done logging for a period of time.

Any...

In San Antonio we have to use them on new installs where he caps are accesible.

350-450 cfm per ton, then adjust freezone.

undersink - tie in before the trap.

side of the house in the grass

never on a sidewalk or parking lot.........or a roof. :whistle:

I mean, check static presure and verify airflow.:angel:

Slow the fan down.

Trap the drain(at least 1" deep) with an SS1 safety T down, 90's and over and up, vent it after the trap with a T (uncapped) and slope it away from the unit. Insulate the line with armaflex.

We were sailing in the Med in 1989 and I had just got qualifed in "Steering and Hydraulics" when I heard an alarm comming from aft steering space.

The ship was in a hard turn, so I take over...

You might take a road trip to San Antonio and fill out some applications. Tech skool grads around here are....lets say...rough around the edges.

At ABC Air we work the guys right up to 40 hours, then we send them home.....or they can work for our "sister" company, XYZ Air, for up to another 40 hours!

:grin2:

Good one.

I am so used to Trane's C being B.....

LOL!

Pull off all the 24v wires and start connecting until the fuse pops.....

Just so you know what an airflow performance check is.

The person will need to take static pressure readings in up to 4 places on your system - like taking your blood pressure.

The blower fan...

Jumper w1 w2 on the unit and see what happens.

I would be less concerned about the SEER and the brand but focus on the contractor that will do the job correctly. A high SEER unit installed improperly or oversized, will work less efficiently than...

disclaimer: We are a Trane dealer, all we install is Trane.

We have installed a few of the Trane XL950 ComortLink II Zoning systems and our customers seem to be pleased with them.

Right now...

Dumb and Dumber was pretty good.

Does a man in his 50s want to work for entry level wages? His lifestyle cannot (in most cases) be supported with entry level pay.

styrofoam cup, brewed coffee, real dairy creamer, sugar, stir stick.

It's hard to believe that a company won't stand behind it's product. Something doesn't add up.

My 1.9L TDI 2005 New Beetle does great on fuel. 40 MPG diesel is pretty good. Plus, it hauls ass! (not from a dead stop, but at 80-90 mph it can jump over 100 mph pretty quickly)

x2

Me too. :grin2:

I thought you moved to Miami with LeBron.

One of my all time favorites. Now, to get my book published....

Exactly.

Here is my favor: Take the family to a hotel tongiht and we will get right on the install in the morning.

Look in the paper for "Estate Sales".

Arrive early.

Go straight to the garage and buy every tool you see, don't stop until they are all gone.

Then take a look around to see if there is...

You need to find someone else to do the work.

I think this is the one. Plan on being here awhile.

http://hvac-talk.com/vbb/showthread.php?t=123540