Search:

Type: Posts; User: saltnew1

Search: Search took 0.00 seconds.

  1. Replies
    14
    Views
    2,478

    If you set the reg for 75 psi and only get 15psi...

    If you set the reg for 75 psi and only get 15psi flow pressure then the problem is before the regulator not after.
  2. Replies
    9
    Views
    2,628

    In a tight house wood stove can kill just like a...

    In a tight house wood stove can kill just like a gas appliance due to oxygen depletion or the production of CO under the wrong conditions. Feed the combustion air directly so the fire has no direct...
  3. Replies
    13
    Views
    1,411

    Manufacturers specifications rule! The customer...

    Manufacturers specifications rule! The customer is not always right whcih is why we are called.
    ryan
  4. Replies
    6
    Views
    1,355

    If you want to deviate from the factory specified...

    If you want to deviate from the factory specified vent kit, I would contact your local gas inspector and ask him what he will approve. In any case the original manufacturers specs must be adhered...
  5. Replies
    10
    Views
    4,240

    Call the installer back.

    Call the installer back.
  6. In order to get warm air to the cold rooms,...

    In order to get warm air to the cold rooms, install a cold air return duct with a fan in it and run it back to the room where the stove is. Pumping cold air into that room will create positive...
  7. Replies
    42
    Views
    3,985

    My experience with HSI is ideal method to test is...

    My experience with HSI is ideal method to test is onder operational load with clamp on amp meter. the least invasive method. nothing gets disconnected and it is tested under operating conditions....
  8. You can use a screw driver but it really loads...

    You can use a screw driver but it really loads up the capacitor ie: high current and may damage it. a 20k 5watt resistor sounds fixed to me. I would go with the specified tool if I were doing it.
    ...
Results 1 to 8 of 8
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event