Search:

Type: Posts; User: weakfish

Search: Search took 0.00 seconds.

  1. The one time that I saw that the burner tube was...

    The one time that I saw that the burner tube was actually exposed in one small area with no sand around it like someone was digging in there, pushed the sand around and replaced the embers and it was...
  2. Replies
    5
    Views
    2,276

    MY BAD

    Thanks to everyone for replying. After taking a better look, it was a small pilot flame. I should have seen that the first time, but the pilot is in the back under the logs, a quick peek under the...
  3. Replies
    5
    Views
    2,276

    Thermopile or gas valve

    I have a Heatilator GNRC36 that won't light when wall switch is flipped.
    The static millivolts are 337, flip the switch and they drop to 186. Tap the valve with back of screwdriver and the valve...
  4. Replies
    1
    Views
    1,083

    Is this doable

    I have customer with a Peterson logset G46-01 burner. it has electronic ignition. It has a box that contains the ignition control module and the battreries, this box sits on the hearth in front of...
  5. Replies
    1
    Views
    506

    Call Specialty Supply 800-331-9234 they are a...

    Call Specialty Supply 800-331-9234 they are a Lennox parts distributor
  6. Replies
    3
    Views
    607

    Hearthman, most local building inspectors want...

    Hearthman, most local building inspectors want two layers of 5/8" on walls seperating garage from living space, some inspectors will let you put one layer on garage side and one layer on house side
  7. Replies
    3
    Views
    607

    Done all the time. frame bump out in garage deep...

    Done all the time. frame bump out in garage deep enough for the fireplace you select, run manufactuers listed pipe as per manufactures directions paying strict attention to lenght of pipe run, number...
  8. Replies
    33
    Views
    10,114

    I think eyeseeitall ment 20 btu per cubic foot

    I think eyeseeitall ment 20 btu per cubic foot
  9. Replies
    33
    Views
    10,114

    Yes vent free does vent somewhere, it vents into...

    Yes vent free does vent somewhere, it vents into you living space. Direct Vent is the only way to go where possible
  10. Replies
    2
    Views
    1,762

    I beleive Marco was bought by Superior which was...

    I beleive Marco was bought by Superior which was bought by Lennox. Take a look at this web link- http://www.marcofireplace.net/
  11. Replies
    6
    Views
    801

    It is 25 deg. outside. What is CPH (cycles per...

    It is 25 deg. outside.
    What is CPH (cycles per hour ?)
  12. Replies
    6
    Views
    801

    Shorter cycles or longer run times

    I have a Ruud 90k btu. 90% gas hot air furnace in a 2400sqft house.
    When it is just maintaining temp it cycles on 10 min off 10 min on 10 min.
    Shouln't it be running for longer periods? If I bump...
  13. Replies
    3
    Views
    1,933

    Is this a regular masonary fireplace with a...

    Is this a regular masonary fireplace with a chimney, or is it a metal factory built fireplace?
  14. You asked for a link and was given one. They do...

    You asked for a link and was given one. They do make remote wall switchs for millivolt controlled fireplaces. Some are handheld remotes that come with a holster to hang on the wall, so you can use it...
  15. Go to-http://www.lennox.com/ and click on find a...

    Go to-http://www.lennox.com/ and click on find a dealer, or go to any local fireplace shop.
  16. Replies
    3
    Views
    782

    It,s like a chattering noise, almost like the...

    It,s like a chattering noise, almost like the sound of a stripped gear, I know it does,nt have any gears. but thats what it sounds like. The flame is fine. Could it be the ignition module?
  17. Replies
    3
    Views
    782

    Noisey gas valve

    Older FMI unit with IPI, When you turn on the wall switch and send 110v to the transformer there is a 10 second delay until igniter starts sparking and gas valve starts making a lot of noise pilot...
  18. Replies
    1
    Views
    1,633

    Superior is part of Lennox ...

    Superior is part of Lennox http://www.lennoxhearthproducts.com/
  19. Replies
    4
    Views
    835

    heatkits- it was the fireplace glass, I didn't...

    heatkits-
    it was the fireplace glass, I didn't do anything to it, and I don't think it was my fault. I still told the lady I would get her a new glass for cost. All I did was take it off and put it...
  20. Replies
    4
    Views
    835

    It hapenned to me today

    Put a thermocouple in a Heat n Glo 6000, put it back together, fired it up, homeowner was so happy her fireplace was working again, gathered up my stuff and took it out to the truck and made her out...
  21. Replies
    18
    Views
    3,796

    I live in Pa. My ducts run across my unfinished...

    I live in Pa. My ducts run across my unfinished basement ceiling, they are always bone dry. Unless my son goes down there to hang out with his buddies and they open a window,if they forget to close...
  22. Replies
    2
    Views
    637

    Infrared and super heat

    Is it ok to use a infrared thermometer to check super heat ?
    If no why not?
  23. Replies
    3
    Views
    1,181

    CHIMNEY INSPECTION

    IS IT NECESSARY TO HAVE A CHIMNEY INSP. IF YOU ARE INSTALLING VENT FREE LOGS IN A MASONARY FIREPLACE. EVEN IF YOU ARE NOT USING THE CHIMNEY
Results 1 to 23 of 23
Comfortech Show Promo Image

Related Forums

Plumbing Talks | Contractor Magazine
Forums | Electrical Construction & Maintenance (EC&M) Magazine
Comfortech365 Virtual Event