Type: Posts; User: filiberto
It was already tight. I unscrewed the nut and re-tightened. It still leaks. Didn't leak during the first 10 months.
Has anyone else replaced their teflon seal?
My high side ball valve slowly leaks into my center port when closed on my AK manifold. Brenda mailed me replacement teflon seals and O-rings. I pulled the red dial off and unscrewed the brass...
I still use an H-10G myself. It is the only detector that I trust.
I also have a 'Inficon Compass', but I get false positives with it on a regular basis.
Another guy at work has a 'CPS LS790B', and...
The Zebralight H502 has a 260 lumen flood output from a single AA battery.
I carry an 'Eagletac D25a (XM-L U2 Clicky)' on my belt and a 'zebralight H502d' on my head. Both use Eneloop AA rechargeables.
Aha! Excellent concise info. Thanks rundawg!
I can see where replacing a muffler with a drier would kill a compressor. The drier would be restrictive, where the muffler would not.
Plus, it would be in the discharge line immediately following...
My high-side valve on my 9-month old AK's have started leaking. Anyone know if there is a repair part that is field-replaceable?
I've emailed Brenda, just waiting for a response.
Can you hook up 'static probes' or a 'pitot tube' to a 'yellow jacket 78055 gas pressure test kit' or do you have to use a manometer?
I bleed my hoses after every call and only zero out my gauges when they show above '1 lb' (instead of zero)... maybe every 2 weeks. You definitely DO want to check them from time-to-time. Especially...
WOW! I haven't laughed that hard in quite some time.
True multitasking... Talking on the phone while heating up a drier to 500 degrees.
At least he wore safety glasses.
I have never had a problem with a Trane muffler, but I have had one of the 'small copper filter-driers' that you are
referring to 'plug-up' 2 months after the unit was installed last year. I...
Sounds like a bad board to me as well.
The relay that feeds the draft motor keeps dropping out.
Some two-stage stats use a timer anyway, so using the timer on the board should be comparable.
I would restring as well at 13 years old.
Have you tested the sequencer(s) yet?
TS-1140 clamps work like a charm on the AK900.
Thanks for your help guys.
Now I get it. Great set-up 'hvac wiz 79'. I am going to order a set of the TS-1140 clamps and copy you exactly. Looks like the best solution for the AK-900.
I have an AK-900. Will my AK-900 thermistors fit inside the TS-1140 clamps? Or are they different sizes? I have never seen a closeup of the sensor used inside the TS-1140 clamps.
Rectorseal Tru-Blu or Leak Lock